bigbadbob's latest activity
-
I did. It didnt change anything, which I expected. While I had the plugs out I did a compression test, which was fine. My next plan is... -
@redline4 did you get a chance to try the new plugs yet?
-
In the 90's, we had 2 new intakes that were flawed. We took them to the Holley trailer at a NSRA streetrod show to get them replaced...
-
Locked up 6.2 on its way out..
-
IAC position is at 100% because it is not used. Default value. I swapped a different rail of coils I had onto the left bank. No change...
-
There are a lot of humans out there that act the same way.
-
Tried that. Tried talking nice to it. Tried talking mean to it. Tried promising it good things Tried promising it really bad things. So...
-
Well, this is fun. My AFR is now in the ballpark considering I've done zero tune adjustments. But..I śhīt you not, the exhaust from...
-
Proper welding attire? Check. Not pretty but will work...
-
I have. I'm using drive by wire. That results in different numbers because the throttle plate itself is the IAC. There's even a...
-
It's a big unit 👍 ours is 38m / But everything is big there 😉 Edit 🤠 Wilhelm confused me 😉 128Ft3=3.6m3 This looks more real 👍
-
4'x4'x8' or 128 Ft3
-
There used to be a shop out here called pacific fab that did a lot of LS. I think they went under a because of the owner and the main...
-
i hate even the thought of my redneck ass giving you advice, with dealership experience youve probably forgottten more than Ill ever...
-
It's port injection. Zero misfires. The bung in the right header can't be used because it points right at the 4l60 servo and there's no...
