bigbadbob's latest activity
-
Project 254 underway. Tore down and split the cases today. Going back together with new 6202’s sometime soon. -
I couldn't find the old pliers I had so I ground one for the 346/357 clamp. Much easier to get it on with these pliers jaws.
-
bigbadbob reacted to MarkEagleUSA's post in the thread The forestry and logging pictures thread with
Like.
You should be able to post a link to a TikTok video here. -
bigbadbob reacted to Catbuster's post in the thread The forestry and logging pictures thread with Like.
A steam donkey. With a few drums. It would be innovative at the time to be rigged between two spars and run something similar to a...
-
-
Looks good Jack!
-
I also got my new Alaskan mill put together. 30 inch rails, but I also have 48 inchers too. Looking for a big ass bar for the 48’s...
-
Finally seem to have gotten my 372xp figured out. Ran like it had an air leak, so I replaced crank seals and clutch side o-ring. But I...
-
I had a Kawasaki in my trimmer and all I had to do was move the connecting rod on the bearings. Someone was driving too lean or without...
-
Had that happen with a new build. Don't feel dumb. At least no dumber than me.
-
Well guess WTF is on the bench again. You guessed it. I ran the 288xp today and made some cuts, but shut it down when I began to hear...
-
That's nice. That's real nice.
-
The 288xp is now a finished product. Put the correct filter elbow on it, new air filter, new trigger assembly, fuel line and filter, a...
-
-
