Basher's latest activity
-
Basher reacted to nnero's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
-
Basher reacted to Miller Mod Saws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I guess I'll have to stick with the 9010!
-
Basher reacted to Miller Mod Saws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Well u know I'm gonna bite! But I can't show my pics of the 6100 as you already are. ;)
-
Basher reacted to exSW's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Me
-
Basher reacted to Greenthorn's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Dolmar, who likey them Dolmars?
-
If you cannot afford replacement of parts you ruin, I would leave it alone!
-
done just that many times
-
It also can be a good way of dialing in timing with a cheap aftermarket piston before cutting on an expensive jug.
-
In old days they modded piston . It was cheaper if someting went wrong.... And piston was lighter ...
-
Not necessarily. Quick and easy on any type, might be less to lose modifying the piston instead of the cylinder. Or you might not want...
-
Pretty common to take a little off the bottom of the skirt on the intake side instead of lowering the port.
-
Cheaper to modify existing pistons than cast jugs with higher transfers?
-
old school porting when you don't have the tools to raise the ports
-
CS-400....Echo
-
Blow down douglas fir on the way to the cabin,,, always pack a saw BBB