Recent content by backhoelover

red indicates the needle needs to be replaced

Need to check your spark at no less than 6mm gap, if you can jump a 6-8mm gap the coils is putting out enough volts to firing the plug under compression. have you tried changing the plug? autozone used to sell a adjustable spark tester you can adjust the gap on for cheap, just have to be careful...

Any husky dealers or tech i can purchase the newest tool manual from? 2017 is the newest one i have.

stihl TI 12.1980 might go over these tools

I do know that the blue tool is vac only, you have several block offs. the dial indicator is for setting timing on the old points saws, just got to make sure you have the tool to attach the dial indicator to the saw. if you looked into some 056/076, 028wood boss etc you will see some of the...

I seen this alot with my landscape guys, i got a sheet of aluminum about 1/8 thick and just cut circles out of it and glues it to the piece that you tap to release the line was a game changer.

https://www.mechanicstoolsandbits.com/product/time-sert-1010-m10-x-1-0mm-metric-thread-repair-kit/?gad_source=1&gclid=EAIaIQobChMI5b33uO-piwMV0yjUAR2v1hxnEAQYAyABEgL-yPD_BwE Here is what i use, it also repairs the stihl 10mm plug threads,

damn they have gotten cheap on us. they used to us a material called mylar atleast i think that was the name of it. has a somewhat checker board pattern on it

Moring guys, long time no talk. How's everyone been.

Had a saw that the seals would only leaking when in mid to high rpm when running, damn thing through me for a loop. had to use carb cleaner to find the leak, not a fan of that but sometime you have to do what you have to do.

stihl puller is ok have to tap the seal before pulling, i like the husky seal pullers they dont mess around

Does it have to be stihl brand? I used a tiny tach for years

have any of these for the platinum class? i have all the golds

Just got a 2022 f250 6.2 6 speed,

It feed air to your emulsion tube. Also spray some carb clean around the carb, intake and head gaskets make sure you don’t have a leak