backhoelover's latest activity
-
backhoelover replied to the thread What's on your bench?.red indicates the needle needs to be replaced -
I can absolutely confirm that if you connect the purge bulb backwards so it pushed fuel into the carburetor the saw will flood very...
-
More wrenching on Project Brownie. New 2/0 battery cables with military terminals. New battery boxes too. Got rid of the roof...
-
You can buy stickers anywhere Tor
-
Can't hide money.
-
Only i can get a new oem clutch bearing thats missing a needle. Im not even surprised anymore. It could be raining pussy and id get hit...
-
Removed the 24" OEM barrel on the Remington 700 .308 and replaced with a RemAge 22" heavy barrel - MTU profile - made by Faxon. Getting...
-
MDT Field Stock showed up for my Remington 700 in .308. Unfortunately, the OD green ones were backordered so I just got a black one...
-
Homelite provided a tool specifically for flywheel removal. If you expect to work on more than 1 or 2 of the smaller models you should...
-
Can't hide money 💰 💰 💰
-
backhoelover reacted to Mastermind's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with
Like.
Dear sir. You are seriously overthinking this. Sincerely, Randy -
backhoelover reacted to stihl #1's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
You would need a slo mo camera since 10,000 RPM is 166 revs per second. Even at idle speed of 3000 RPM that is 50 revs per second. All...
-
backhoelover reacted to Mastermind's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
I believe you are thinking about it as if it were a four stroke engine. It isn't like that at all. The timing events in a two stroke...
-
backhoelover reacted to Mastermind's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
I'm really glad to see someone interested in this stuff. I'll do all I can to help. Time is always short for me though. Think about it...
-
backhoelover reacted to Mastermind's post in the thread Question about Crank Stuffers Case Volume and Primary Compression with Like.
You said when the intake port closes.... That happens when the piston is about 80° of crankshaft rotation away from TDC. Think about...