atpchas's latest activity
-
atpchas replied to the thread STIHL Clutch Drum Fan Housing Assembly.The bearing in the FS91 is not intended to be replaced, unlike, for example, the bearing in the FS240 (see IPL excerpts below). That... -
atpchas reacted to singinwoodwackr's post in the thread FOUND IT Stihl .50 3/8 chain….does anyone here spin loops or know the cheapest place to get some loops??? with
Like.
Anyone who goes through a lot of chains in a season should buy a breaker and spinner and then, look for deals on rolls of chain. I pay... -
atpchas replied to the thread FOUND IT Stihl .50 3/8 chain….does anyone here spin loops or know the cheapest place to get some loops???.This is not a bad deal: https://www.ebay.com/itm/286950203668
-
Yes, right from the inception. The Duke's cylinder is made by folks that make pistons and cylinders for a living, not a child staked to...
-
atpchas replied to the thread Poulan 5020 wont re-start when hot.Presumably NOT marine engine 2-stroke oil.
-
How about welding/bolting a hitch ball to the top of a jackstand a putting it under the ball hitch. You won't have to screw with the...
-
atpchas reacted to ray benson's post in the thread Who builds/built the ICS concrete cutting chain saws with Like.
ICS site document list - has owner's manuals and parts lists. https://www.icsdiamondtools.com/en/document-library Not sure if it is a...
-
https://www.arboristsite.com/threads/whats-on-your-bench.324852/post-7865916
-
atpchas reacted to hacskaroly's post in the thread Anything out there on Troybilt TB2MB Blower? with Like.
Here is a link to a parts diagram for both the engine and the surrounding plastic: Jack's Small Engines - Troy Bilt TBM2MB Blower IPL...
-
atpchas reacted to Only the Tony's post in the thread HELP! So where do we go from here folks? with Like.
I'll throw in my 2 cents worth. This is the only forum I frequent. Life, work, play, family all take time so that I don't have much...
-
If you cannot afford replacement of parts you ruin, I would leave it alone!
-
You grind them back in with a diamond ball when your done with the port. Maybe consider experimenting on a saw you own before you do it...
-
atpchas reacted to bpmaas's post in the thread HELP! Stumped on Stihl TS420 rewind starter with Like.
I took the starter off of my TS500I (same starter as TS420), to see what happens. When I start to pull, the pawl immediately starts to...
-
I use my chainsaw helmet with mesh shield while trimming. You can see well with it except when the sun is in your face.