Al Smith's latest activity
-
Al Smith replied to the thread HELP! Miller welder.What has not been mentioned is 7018 ,no matter who makes it has a tendency to absorb moisture . This can really screw you up .You can... -
Al Smith replied to the thread The Official Log Splitter thread.There is some merit to a lifter but I chose a tilter for my home built because it was more simple to make .Problem became I got older...
-
Al Smith replied to the thread The Official Log Splitter thread.Some pumps had the relief built into them and others used the control valve .If I'm not mistaken the "dirty hand " design models used...
-
Al Smith replied to the thread MCCULLOCH The official McCulloch thread.The model 10-10 had one of the longest production runs for just about any chainsaw .I have a few of the early right hand start and one...
-
Al Smith replied to the thread MCCULLOCH The official McCulloch thread.That boot deal reminds me of ordering one from Scot at Chainsawr .He thought I meant the intake boot .I think he expected me to get...
-
Al Smith replied to the thread The Official Log Splitter thread.The thing with a nut is the detent pressure control and I think under the port is the transfer from from high flow lower pressure to low...
-
Al Smith replied to the thread 2100 CD Build.If you look back at the carb picture I sent in it shows the right angle adapter used with a vee stack. All that weight is on two rather...
-
Al Smith replied to the thread 2100 CD Build.More to the saga of the 2100 Husky .What I did not know about that saw was the fact it had rear bracket from the air box to the carb...
-
Al Smith replied to the thread Torx tools.Menards is about two miles away from me and Lowes is across the road from it .TSC is another half a mile if that .I've actully got the...
-
Al Smith replied to the thread 036 hard to pull starter cord.In that case if the starter drum which Stihl calls a "rope rotor " has worn excentric you have two choices .Either bore out the hole...
-
Al Smith replied to the thread best weed trimmer head or line for heavy stuff.I think I have four weed wackers that run .Most if not all of them run blade heads .I gave up on string heads a long time ago .I found...
-
Al Smith replied to the thread 036 hard to pull starter cord.If it just pulls over hard it could be the starter drum could be running excentric which will jamb the pawls .Some saws have a bushing...
-
Al Smith replied to the thread Chain Tools?.I have both an Oregon spinner plus concave punchs I use for1/2" chain .The 1/2" isn't what most prople even own but I have old gear...
-
Al Smith replied to the thread Torx tools.I've got a complete set of Wiha tools they bought for me at work .Some of those robots etc. came with some really odd ball fasteners .I...