92TRX300FW's latest activity
-
Seals, intake boot, impulse line, fuel line, fuel filter, spark plug, tank vent, Maxflo kit, top cover, trigger parts. Make sure the... -
I've heard from others that the 250 is not fun to work on. The thing is tho I'm kinda of expected to at least rebuild it and then maybe...
-
92TRX300FW reacted to Woodwackr's post in the thread HELP! LA (Idle Speed) Screw Problems with
Like.
Have you called Ghost Busters? -
I always do; 4 pieces of solder every 90 degrees, held in place by a dab of grease. Just curious about what other folks have found.
-
92TRX300FW replied to the thread $200 Running MS660 - Now What?.mesure squish first before doing any gasket delete
-
If you need any parts I've got one under my work bench I'll send ya. Just pay for the ride.
-
92TRX300FW replied to the thread Saw building 101?.i won't reccomand porting an aftermarket cylinder and what i would reccomend you is repairing that ms 250 and sell it then buy a pro...
-
2100, getting a new thin ring setup,
-
92TRX300FW reacted to lehman live edge slab's post in the thread HUSQVARNA HUSQVARNA THREAD with Like.
Guy brought a husky 562 mark 1 in and wants it fixed and for sure it needs crank bearings but not sure if it needs a crank also seems...
-
Idle air bleed screw. It's essentially the same as opening up the butterfly a little. It forces the computer to richen up the idle...
-
92TRX300FW replied to the thread HUSQVARNA HUSQVARNA THREAD.575286901 husqvarna parts for the tool
-
I have a 246 on the way 😀
-
92TRX300FW replied to the thread What's on your bench?.yes husqvarna makes a crank splitter for the 550 parts 575286901 and i would reccommand you buying the crankshaft tool too parts 502503023
-
92TRX300FW reacted to StihlEchoingHusky's post in the thread Oh my God I have finally found it with
Haha.
The fabled bro carb!!! Complete with a beer bong, a white snapback hat to be worn backwards, polarized sunglasses, white t-shirt... -
Trial and error. I’ve ported several of these saws and 6* seems to be the sweet spot for how I do them.