59billy's latest activity
-
59billy reacted to SawAddictedFarmer's post in the thread Not so pros 4 new and without politics or drama with
Like.
Good morning. @Wonkydonkey your almost always better off lapping the valves as it cuts the head and the valve as close as possible to... -
The carburetor needle slot is on the left side of the chainsaw above the fuel cap. The L and H needles are beside each other. The Lis...
-
Welcome! I would first try to adjust the carburetor. It sounds like the H carb needle needs turned out about 1/2 turn. Unless it’s one...
-
OK, I’m going to show my inexperience. Where is the H carb needle? And do I turn it clockwise or counter clockwise? I’m using premixed...
-
-
$23.50 for hose and $12.14 for 8 fittings for two tractors,..... as opposed to new MTD lines ( 4 needed) @ around 150+ per...
-
Furb - that is fantastic. I certainly remember playing with one like that as a young boy, you press the dump bed down and moving that...
-
10' of contitech insta-grip and 8 fittings to make new oil lines for a couple kt17's.
-
I’ve had good luck with their stuff. The OEM carb has me stumped. I’ve rebuilt it, it pressure tested fine, but it still leaks fuel.
-
I look forward to hearing how this goes for you, I have been happy with Duke's carbs so far.
-
I got one of these today. I’ve got a carburetor that won’t stop leaking on a 361.
-
-
59billy reacted to Stump Shot's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning. 18F 🌨️
-
59billy reacted to hacskaroly's post in the thread HELP! Ms460 Arctic parts robbed off saw with Like.
Welcome to the forum!! Isn't it great when someone gets in there and rips out all the good stuff? I have a Husky 272 XPG that someone...
-
59billy replied to the thread Not so pros 4 new and without politics or drama.Good morning, chain gang. 32f with promise of 66.