59billy's latest activity
-
59billy reacted to Partner's post in the thread How To Remove Aluminum Transfer Without Acid with
Like.
The thickest one can be unscrewed into 4 3" discs, and the smaller ones are 2" and covered with epoxy -
59billy reacted to ray benson's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning. 9°F/-13°C going up to 28°F/-2°C.
-
59billy reacted to ray benson's post in the thread Not so pros 4 new and without politics or drama with Like.
Daughter's Armstrong nat. gas furnace needs the flame igniter sensor pulled and cleaned every year or it will fail.
-
026 and 066
-
I wouldn't want your 2100 experience to be that easy.
-
Don’t worry, I’ll take it for you!
-
One of these days I’ll tear mine down and figure out what’s wrong :p
-
I may have done similar to my 2100.
-
Piston and cylinder were fine. Crank was fine. I got lucky. Cases cleaned up, old bearings removed. Ready for reassembly tomorrow with...
-
Well it has become very obvious to me that I somehow sabotaged my own saw. As soon as I started tearing it down, I removed the air...
-
I want to use my 266xp again, so it’s time to tear this thing down and do the bearings
-
The 550 & 562xp’s do most of the fire wood bucking, unless it’s a monster log. Felling is usually the 565 that’s now quite a zippy...
-
The 1/4" pitch queens have been doing exceptionally well. Top by @huskihl Kevin Bottom by @Crocky28 Mark Left bone stock Right on the...
-
https://share.google/jRGb0OvYvZdiJ7xbX
-
59billy replied to the thread Not so pros 4 new and without politics or drama.Good morning. 47f heading to 56 with rain. The gas furnace went poof last night. Hopefully my HVAC guy can come fixeded it today. Now...