59billy's latest activity
-
it's ok. you can come out of the closet. we'll understand. -
Class 10.8 bolts (metric equivalent of grade 8) used in chainsaw cylinder bolts have a minimum tensile strength of 150,000psi which is...
-
Alright, enough of this Husky bolt talk…..more vids…😁
-
Is that a fact? I've built a couple of saws. I've had to extract a few broken cylinder bolts. I've never had a stripped cylinder hole...
-
Echo cst 610 evl
-
I honestly never do more than spin it on by hand but all mine are inboard clutches.
-
I have done this (torquing using piston stop) and had them come loose. But each person needs to figure out what works for them. And yes...
-
Exploding a clutch in the shop is a rite of passage. That moment when you realize you still have both eye's is priceless. Also you...
-
I hand tighten There are a few ways to get things tight, but the saw, in theory will tighten the clutch down as it’s turning in the...
-
I have always just tightened them as much as I could with the various clutch tools I have which are not great. Have not had one come off...
-
Nothing like a clutch burnout on the shop floor
-
Asparagus and eggs over easy on white rice. Soy and Sriracha on top.
-
59billy replied to the thread Reinstalling clutch.Some people have no sense of adventure!
-
Well, you're no fun...
-
Unless you are using a multi-speed/torque, 1/4" impact that you can dial down as needed, just use a piece of pull rope in the plug hole...
