59billy's latest activity
-
This is my 6th saw and the only one that ever leaked. The ONLY possible explanation is that during the winter 23/24 I hung it from the... -
Always been an old stiff oil line on all my Stihls causing the leaks. Never have figured out why the one Husky leaks.
-
There’s a duck bill behind it. At lease the oem one does. Older one case use spring ball check valve though. There’s 2 type of vent on...
-
Typically when I am trying to chase down a leaky saw, is to take apart as much as possible and give it a good cleaning. put it all back...
-
Hm.. I disagree with that. 372 oil tank vent is a check valve. Only allow air in not out. Even the OEM one would build up pressure and...
-
I believed the pump itself has sloppy tolerance and leaks front the piston shaft. There isn’t much parts that would go wrong actually.
-
59billy reacted to Bada_Bing13's post in the thread Husky 372XP Excessive Bar Oil Leakage with
Like.
Ok, I'll just buy OEM lines all the way around and the grommets if I can find them too. I'm just having a hard time locating a OEM... -
My electrolysis tank was made from a 55 gal plastic drum with top cut out. I have four t-posts welded to a wore out 4 way lug wrench...
-
Thanks for the pic. Simple things for us simple thinkers.
-
Reading several comments above, Begs (Begets) the query, Heated or cold water work better? I was/am thinking of setting it out in the...
-
59billy reacted to Junk Meister's post in the thread Not so pros 4 new and without politics or drama with Like.
If Ya git outta der way "Jest Sayin"
-
59billy reacted to Stump Shot's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning. 17F ☁️
-
59billy reacted to ray benson's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning. 41°F/ 5°C going up to 46°F/ 8°C.
-
59billy reacted to Only the Tony's post in the thread Not so pros 4 new and without politics or drama with Like.
Damn slackers.
-
The math checks out.