59billy's latest activity
-
59billy reacted to Fabulous's post in the thread WANTED Looking for a STIHL 064 builder saw. with
Like.
Ok - tell me what’s available thanks 😊 -
59billy reacted to Bill G's post in the thread WANTED Looking for a STIHL 064 builder saw. with Like.
I have some.
-
59billy reacted to jacktheripper's post in the thread WANTED Looking for a STIHL 064 builder saw. with Like.
Check on arborist site with David Major
-
@Bill G
-
59billy reacted to redneckhillbilly's post in the thread What oil is best? and what ratio? with Like.
is there anyway to prove that the husqvarna premix canned fuel actually uses husqvarna mix oil in it, I was thinking about adding some...
-
59billy reacted to Kiwioilboiler's post in the thread Not so pros 4 new and without politics or drama with Like.
Morena E Hoas.
-
59billy reacted to edisto's post in the thread Clutch covers too narrow for good chip clearance with Like.
I was having a similar (but opposite) issue milling with a milling chain...dust instead of noodles. I made a bar clamp out of 3/8 plate...
-
59billy replied to the thread Red Armor vs Stihl Ultra Datapoint.Oil threads are forever.
-
59billy reacted to Bill G's post in the thread SELLING New Stihl 16 inch Bar Rollomatic E .325 pitch .063 gauge 67 driver #3003-008-6613 with Like.
Pics.
-
@Definitive Dave
-
Pics
-
I know it's been debated, but what are your opinions on these things? Ported saws run like mad with them, but how long until you start...
-
That means if you dump straight ultra on to the ground it will degrade by 80% in 21 days , it has nothing to do with shelf life of the...
-
Friend brought over two saws this weekend; a gorgeous "red lever" 026 and a very fine 028 Super. Both saws ported by the same builder...
-
59billy reacted to Czed's post in the thread Any Chinese chainsaw and chinese parts discussion with Like.
I still say the g288 is my favorite clone that I've run It was just right out of the box OEM power and feel I have several OEM 288s...