59billy's latest activity
-
That's a really good way of explaining loading up a saw, right there. -
Most chainsaws carbs don’t have an accelerator pump. Using max idle rpm will bog a little when revving the saw. Need to set the L screw...
-
And it’s pretty easy to adjust that H needle under load. Bury the bar or at least get a good log to cut and make sure it burbles when...
-
Glad to hear you got it figured out!
-
Update got these saws all squared away not sure still what was causing all the issues or if it was a combination of a couple things. In...
-
Sounds a bit of a strange one. You would almost think it's sucking air in when it heats up and were it would be hard to say as you have...
-
Throw a gasket in after cleaning up all the schmootz, might tell you if it was lack of sealing on that pto side.
-
Not overly surprising to have different thicknesses of schmoo, when you consider that the base adapters are notorious for warping.
-
Hard to say if you have a problem in these spots, but the PTO side doesn’t show much sealant (black arrows) and there is a fair bit of...
-
It is the OEM line off my 346. I swapped them and symptoms stayed the same and the 346 ran fine with the other line
-
This is what it looked like when I pulled the jug today
-
Is that impulse hose kinked? They kinda need to be OEM with the loop in order not to
-
I remember this as well. Definitely worth running with the top off until it’s hot and then spraying brake cleaner around the gasket...
-
Seems to me I recall messing around with one of these saws and the cylinder base bolts bottomed out in the adapter on me just prior to...
-
Swapped with known good coil off 346xp
