59billy's latest activity
-
the whole thing is a pain, i had a 372 apart 4x once. very frustrating -
Dunk it .....see where bubbles r coming out
-
Purge bulbs are at their most useful on saws that have been sitting for a while, reducing the number of pulls before fuel is available...
-
59billy reacted to RIDE-RED 350r's post in the thread Husky 346 OE to NE Intake conversion with
Like.
I have a question/theory on the purge bulbs: Seems as though in my limited experience anyway, that the only saws that have purge bulbs... -
59billy reacted to idiotwithasaw's post in the thread Husky 346 OE to NE Intake conversion with Like.
Just block off the primer port on the carb and go on. It's one less thing to worry about.
-
59billy replied to the thread Not so pros 4 new and without politics."Friday night's drinks bring next week's parts." -- old Swedish proverb
-
59billy reacted to Wonkydonkey's post in the thread Not so pros 4 new and without politics with Like.
Good evening retards. It’s Friday evening ! So I guess it’s time to get moar retarted 😘
-
I found a case with a crank and bearings. Yes I'd need a top cover. I'd have to check them though. Nice how a $40 saw gets out of control.
-
It would be nice if the 346 case had the crank with good bearings. Clutch side crank bearing is proprietary and a bit pricey, but not...
-
346 brace with the flywheel side leg cut off and a small washer under the lower spike screw to keep everything in line. Seems to fix the...
-
One other thought, the 350s are known to throw the muffler bolts loose, the muffler then flops around and burns the plastic and too much...
-
Bearing cap 503 88 59-01, 537 32 40-01 NLA
-
59billy replied to the thread Not so pros 4 new and without politics.There's a fix for that.
-
Sadly he will probably return
-
I do not care much about chainsaws nowadays, the older I get the less it means to have a powerful saw. Nowadays I want to take the one...