59billy's latest activity
-
@Shane how has the Dukes kit held up so far? I bought one to try as OEM NE was $220. I'm no porter but the ports and transfers looked... -
I think people are seeing the three series stuff going NLA and holding on to their junk.
-
HL Supply just got some back in stock last week. New Edition 44.3mm 346XP OEM Husqvarna cylinder kits. I have one on the way as of...
-
I actually picked up a 345 that I am going to put it on
-
59billy reacted to Flying_Dutchman's post in the thread WANTED 346xp new edition cylinder with
Like.
You gonna put it on the 340? -
Anyone got a good used 346xp cylinder and piston for sale? Let me know if you have anything. If I can't find a used one I will probably...
-
I got this one from the US
-
I’ve used a drill to make things a bit quicker…. But I’d not recommend doing the bolts/screws up with a drill. It’s way way too easy to...
-
My set, and extra T27's. Only the yellow handled one has a center hole on the long end, the set has it only on the short ends.
-
I have a cheap supermarket set, seems to work fine so far. Get ones with the center hole! Every now & then You will encounter a screw...
-
https://shop.snapon.com/product/TORX-Soft-Grip-Handle/8-pc-TORX-L-Shaped-T-Shaped-Combination-Wrench-Set-(T10-T45)/AWSGT800A
-
This is an excellent starter kit. https://www.hlsproparts.com/Complete-Set-of-Wiha-Chain-Saw-Tools-p/wtk-dns.htm
-
Awesome!
-
Did some research and found the things needed to upgrade are the pump, drive gear, and the retaining screw for the pump. I have...
-
What I actually think I need is a 254 and a 394. And I just so happen to know where two carcasses are sitting that I’m going to buy next...