066 redeye's latest activity
-
1st box has a few chain wrenches, adjustables and a chain breaker. Box by the drill press has drill things. Box by the welding... -
The ignition is powered from magnets on the flywheel. There are wires going to the coils but those are for “killing” the spark. When...
-
066 redeye replied to the thread Walk over to your toolbox right now….Top tier 4th drawer L&R. Bottom tier 4th drawer L&R.
-
-
i file them flat and the last stroke of the process i knock the front edge off so it doesnt drag
-
And that is the "slow" charger for this 1800 kg battery.
-
I prefer to restore the depth gauges to factory profile, to minimize the risk of a sharp corner catching. Use a flat file, Dremel, or...
-
I've welded many like this with only removing the chain brake parts that can be melted and the muffler for access. Everything else is...
-
066 redeye reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Various photos 024 filter,024 super/026, ms 260 all have the clearance for 8mm carb nuts and all are oem filters. 260 uses the tab to... -
066 redeye replied to the thread Stihl 064 help.I did one. I found a piece of automotive fuel hose 3/8?? that fitted in the tank piece, cut a piece about 5mm high then glued the hose...
-
I think he was looking for the entire vent, including the pieces that snap into the tank?
-
#9 is a grub screw, I have a 046 and an 066 that are using that type of vent. Just regular fuel hose and the grub screws. I am using two...
-
-
-
-
