066 redeye's latest activity
-
066 redeye reacted to Al Smith's post in the thread Looking for ideas on broken stud removal with
Like.
To follow up on this what you have is galvanic reaction between dissimular metals .In other words it gets stuck.On reassembley you might... -
Philbert
-
@singinwoodwackr I used the same 2” stuff as you tried and got it to work ok. The key to it shrinking around the corners is to pull on...
-
seeing how comyfornia is anti petrol powered anything likely won't have much luck. the problem with JD stuff is the eng, is built to...
-
Remember when @Mattyo made a 288xp Hightop cover out of high strength fiber plastic? Spent his own money on design and production out...
-
Just a word of warning, never tighten muffler bolts when the saw is warm. When installing a new gasket or muffler run a few heat cycles...
-
066 redeye reacted to bucketofguts's post in the thread How often do you use your chainsaw? with Like.
PRN, which stands for "pro re nata" or "as needed," Lesson over .;)
-
Good to have choices: Philbert
-
Somebody's been using that pair as a circuit tester! :oops: :meparto:
-
066 redeye replied to the thread D110 Not starting.A walk across the Gordon dam is a must.
-
066 redeye reacted to Creaky limb tree care's post in the thread Calling Out The Internet BS with Like.
Me too! Can anyone explain how does a crankshaft get to a temperature of between 5 or 600° Fahrenheit (temp required for bluing) without...
-
066 redeye replied to the thread Calling Out The Internet BS.Well I am running a few saws with f##%&ed cranks then. Bluing on the crank but not on bearings or pin. Still running after about 5 years...
-
066 redeye replied to the thread D110 Not starting.Everywhere is just great. Just don't expect to drive around the state in 3 hours as most visitors expect to do. Lake Pedder,Gordon...
-
066 redeye replied to the thread D110 Not starting.That's the saws I have.
-
066 redeye replied to the thread Calling Out The Internet BS.Same as bluing on the crank.