"Wilhelm" on YouTube - this is my channel

[Wilhelm]

This MMWS PS-6100 is wickedly high strung!

So, I will not get a "Like" because I made more damage to my stand than to my chain?
I bet I'd have gotten a like if I had hit the chaps on my leg, LOL.
Three left hand teeth got a little nicked at the corner of the teeth, the damage will be remedied by two or three touch ups the most - alas the chain is perfectly fine.

Stay tuned, more coming up to the Tube.

 

[Wilhelm]

MMWS Dolmar PS-6100 with Oregon LGX play chain in beech and oak logs.
Same saw, tune and chain as in the previous video.

 

[Wilhelm]

Factory stock Dolmar PS-6400 running modified Oregon Vanguard chain which has been sharpened with an Archer Fast Filer sharpening jig from HLSupply.
Logs are beech and oak.

 

[Wilhelm]

MMWS Dolmar PS-6100 running Oregon LGX play chain in beech - the previous run was so much fun I had to make some more cookies.

 

[RI Chevy]

No Wilhelm. You took it all the wrong way. Lost in text I guess. Oh well...

 

[Wilhelm]

Ya' know I was just kidding You, right?!

Yes, text can easily come over the wrong way.

Thanks for watching and the likes!

 

[RI Chevy]

Lol. Good luck with your first of many ported saws!!! [emoji16]
That 6100 is nice.

 

[Wilhelm]

Hush now!!!










A Makita EA5000 is in the works . . .

 

[Gizzard]

Play chain was great. All the torque pulled the stand into harms way. Could be some operator error too with having Fun.

 

[Wilhelm]

I had no decent sized firewood two weeks ago but really wanted to give the MMWS PS-6100 a try.
I took a 20" long beech round and strapped it to the steel stand.
There just wasn't much length to make multiple cuts, the round was also way too small in diameter in order to fully load the saw.

Operator error?
Certainly! The saw did exactly what she was supposed to do, cut through everything and anything she touches.

Everything is fine, saw, chain, stand, chaps, me - no harm done!

Thank You for watching!

 

[RI Chevy]

Good Wilhelm. [emoji106]

 

[Wilhelm]

MMWS Dolmar PS-6100 running play chain in semi dry beech

 

[Wilhelm]

Dolmar PS-7300 with mild muffler mod running play chain in semi dry beech, same chain and log as in the previous video

 

[Wilhelm]

MMWS Dolmar PS-6100 running a Oregon Vanguard loop with modified rakers and sharpened with an Archer FastFiler sharpening jig, log is semi dry beech

 

[Wilhelm]

My mom's pup Heidi trying to befriend our cats

 

[RI Chevy]

The MMWS6100 looked pretty close to the mildly modded 7300. Both very nice.

 

[Wilhelm]

My Dolmar PS-7300 is factory stock, with carb limiter tabs in place, but with mild muffler mod.
I think she is running a little on the lean side.

Mild muffler mod being:
- bird cage still in place but with all holes and openings enlarged
- single exhaust outlet but enlarged to the max under the stock deflector while maintaining the ability to use the stock spark screen

Thank You for watching!

 

[huskyboy]

Definitely get rid of the limiters Wilhelm, in the winter she will be running lean.

 

[Wilhelm]

It is on my lengthy to do list!

Is there a way to pull them without taking the carb off?

 

[huskyboy]

It is on my lengthy to do list!

Is there a way to pull them without taking the carb off?

Just take a razor blade or dremel burr and cut off the plastic tab that limits movement.