DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[Wilhelm]

- part number 980 114 142

This is the PS-6000i/PS-6800i starter assembly sticker, it's nice!
I should have gotten a few more.


FYI:
Part number 980 114 911 is NLA, it is the rounded off square clutch cover decal of the PS-3410TH non-TLC!

 

[Wilhelm]

NOTE to @ajschainsaws , if You can check and actually have a lead on the old decal style I am extremely interested in purchasing a couple for both PS-6400 & PS-7900.

But if You get Your stuff from current Dolmar stock the decals will be the new style which I already have and don't need.

Thank You!

Edit/P.S.:
Original / old decal styles that I am interested in

 

[Wilhelm]

The carb tool kit I purchased off eBay came in today, it looks like a decent set for ~14$ shipped, semi hard storage/carrying case included.


There is no real strap to hold the drivers in place, so they actually bounce around inside the case.
The case is much bigger than it needs to be so it will easily hold a little red screw driver and other small odds as well.

To confirm what others have told me, YES a Dolmar PS-7310 takes a double-D for the H needle!

This cheap double-D fits the H needle nicely snug.

 

[Simondo]

The carb tool kit I purchased off eBay came in today, it looks like a decent set for ~14$ shipped, semi hard storage/carrying case included.
View attachment 84578 View attachment 84582
View attachment 84583 View attachment 84584
There is no real strap to hold the drivers in place, so they actually bounce around inside the case.
The case is much bigger than it needs to be so it will easily hold a little red screw driver and other small odds as well.

To confirm what others have told me, YES a Dolmar PS-7310 takes a double-D for the H needle!
View attachment 84585
This cheap double-D fits the H needle nicely snug.

Nice set.....DD for 6100,5105, 420/421 and ps 35 as well ..easy

 

[FergusonTO35]

I remember back around 2011 I bought a similar set from somebody in Israel. Price was something like $14.00 USD and shipping. At the time, there was a rumor going around that EPA was going to fine the crap out of anybody selling them to the public. Not sure how true that was, in any event the kit I got works perfectly.

 

[FergusonTO35]

Original / old decal styles that I am interested in
View attachment 84576 View attachment 84577

Yes, those are the decals I am wanting to have custom made for my 5105. I sent those pictures to the Decal Dan guy, hopefully he can hook me up.

 

[Wilhelm]

Yes, those are the decals I am wanting to have custom made for my 5105. I sent those pictures to the Decal Dan guy, hopefully he can hook me up.

Let us know about his response!
He might be able/willing to reproduce the old style ones I would like to have.

 

[Wilhelm]

Look what I got from my Dolmar dealer of choice, neither local nor even within Croatia.

Yes, it's a sticker!
That's a 20" D009 bar for scale.

Don't ask, I have no idea what part number this sticker is.

I'm thinking about putting it on my car trailer.
Would sure like a couple more.

 

[ajschainsaws]

Ahhhh ...the nostalgia trip ! ..Eeeeee lad , I remember when saws were made of girders ...if they wouldn't start then we hit the tree over with them.
The 7910 remains spotless by the way .

That's good news

Look what I got from my Dolmar dealer of choice, neither local nor even within Croatia.
View attachment 84628
Yes, it's a sticker!
That's a 20" D009 bar for scale.

Don't ask, I have no idea what part number this sticker is.

I'm thinking about putting it on my car trailer.
Would sure like a couple more.

They are good stickers got a few here awkward size too put in the mail
Have you seen this one before

 

[Simondo]

That's good news


They are good stickers got a few here awkward size too put in the mail
Have you seen this one before



View attachment 84632

I have Banner envy now !!

 

[Dolmar Junkie]

That's good news


They are good stickers got a few here awkward size too put in the mail
Have you seen this one before



View attachment 84632

No, if you were so inclined I would probably pay a small fortune for any dealer related signage or promotional material...

 

[ajschainsaws]

NOTE to @ajschainsaws , if You can check and actually have a lead on the old decal style I am extremely interested in purchasing a couple for both PS-6400 & PS-7900.

But if You get Your stuff from current Dolmar stock the decals will be the new style which I already have and don't need.

Thank You!

Edit/P.S.:
Original / old decal styles that I am interested in
View attachment 84576 View attachment 84577

It will be no doubt the same , they will send that part number if it's in stock but I've been lucky in the past got most small parts and covers I've neeeded for the 6000 6800 6400 7900

 

[ajschainsaws]

I have Banner envy now !!

Sticker envy is under control

 

[exSW]

Windshield shades and backglass stickers like Stihl has would be nice.

 

[Dolmar Junkie]

Windshield shades and backglass stickers like Stihl has would be nice.

Most graphic design print shops can make anything you want these days, when my wife's Excursion became the primary MTC tow vehicle, she had a large ( about 16×24) Fox racing decal made for the back window.
They just googled the images and we picked the one we wanted and whammo bammo it was printed! It was even cost less than $20.
Another time I was trying to duplicate a padded decal, they had to order the material but were able to reproduce it exactly. Try local sources first,you might be surprised...

 

[FergusonTO35]

View attachment 84632

 

[FergusonTO35]

I'm diggin' that 980 116 003. Where can I get one?

 

[Wilhelm]

... They are good stickers got a few here awkward size too put in the mail. ...

The sticker was sent along with the pictured bar.
I've cut the cardboard it was shipped in open to recycle it and "found" the big sticker inside.
Didn't even know it was inside, sure glad I found it though!

... Have you seen this one before

View attachment 84632

I want one of those . . .

No, I haven't seen one of those before!
No Dolmar dealers in neither close nor far proximity of me.

I'm diggin' that 980 116 003. Where can I get one?

It is really nice, I too dig it!
I didn't really know what to expect how it'll look like in person, now I'm a little sorry that I didn't get a couple more (I have three).

Any Dolmar dealer should be able to get You some.
But if You crave only one I am willing to send You one!
PM me Your address if You'd like me to.

 

[ajschainsaws]

I'm diggin' that 980 116 003. Where can I get one?

I got two sets here one set is going on a 115 the other is spare

 

[Wilhelm]

Most graphic design print shops can make anything you want these days, when my wife's Excursion became the primary MTC tow vehicle, she had a large ( about 16×24) Fox racing decal made for the back window.
They just googled the images and we picked the one we wanted and whammo bammo it was printed! It was even cost less than $20.
Another time I was trying to duplicate a padded decal, they had to order the material but were able to reproduce it exactly. Try local sources first,you might be surprised...

Usually manufacturers have stuff like that and tend to give it away to dealers/customers.

A customer shouldn't have to get promotional materials made and pay out of their own pocket for it!

It's a shame that promotional giveaways are so scarce and rare.

I've gotten a Dolmar hat on my recent Dolmar order, and now this sticker.
I've gotten nothing else for free in ower 20 years of using and buying Dolmar.
It's a little bit saddening!