WANTED Stihl ms460/660 good used oem coil

[huskyboy]

Looking for coil part number 1122 400 1314. I have a friend who is a older gentleman who needs two of these coils for his saws, the start retard built into these coils makes them easier to start for him.

 

[Lightning Performance]

Looking for coil part number 1122 400 1314. I have a friend who is a older gentleman who needs two of these coils for his saws, the start retard built into these coils makes them easier to start for him.

Do you have good OEM trades?

Have a 460 and an 046. Known good runners on saws.
I can check them all including the 660's. They start very easy imo.

 

[huskyboy]

Do you have good OEM trades?

Have a 460 and an 046. Known good runners on saws.
I can check them all including the 660's. They start very easy imo.

Whatcha looking for trade Kenny? I don’t have too much stihl stuff.

 

[huskyboy]

Bump

 

[Lightning Performance]

Whatcha looking for trade Kenny? I don’t have too much stihl stuff.

Ok then whatcha got?
I can go check the coils now. Still on the saws.

 

[huskyboy]

Ok then whatcha got?
I can go check the coils now. Still on the saws.

I have a jonsered 670 parts saw, not complete. Scored. 394/5 hi top filter, clutch and some other hoosky smalls. I would also be interested in buying the coils outright if you are willing to part with them for $, I need 2 of them.

 

[Lightning Performance]

I have a jonsered 670 parts saw, not complete. Scored. 394/5 hi top filter, clutch and some other hoosky smalls. I would also be interested in buying the coils outright if you are willing to part with them for $, I need 2 of them.

Ohhh bait!

Just got home. Scored tools!
Going now to pop the covers. When I can not start my saws....I'm done messing with them.

 

[Lightning Performance]

460 coil was off in the bin with it's runner.

These are my saws and known good.



They must be replaced with something to run on my mill. My hybrid has a stock 44 system on it afaik

I go get the 046 runner.
Brb

 

[Lightning Performance]

046. Low hours saw. Spent most of its life rattling around in Devons pu truck. First time the recoil was ever removed I do believe. It needs a piston.

 

[Lightning Performance]

Should I bother checking the 044 12mm saw?

 

[huskyboy]

Should I bother checking the 044 12mm saw?

Most 044/440 have the generic 1300 coil with fixed timing but feel free to check

 

[Lightning Performance]

Most 044/440 have the generic 1300 coil with fixed timing but feel free to check

Are using a poly wheel saw?

 

[huskyboy]

Are using a poly wheel saw?

Nope, you don’t have to. It is functional with metal flywheel saws. A hybrid and a 440 are the victims. They kick too much with the 1300 coil.

 

[huskyboy]

That 1312 coil also has the start retard in it like the 1314 coil. Pm sent

 

[Lightning Performance]

Nope, you don’t have to. It is functional with metal flywheel saws. A hybrid and a 440 are the victims. They kick too much with the 1300 coil.

So flip your cut key.

 

[mikerudder]

046. Low hours saw. Spent most of its life rattling around in Devons pu truck. First time the recoil was ever removed I do believe. It needs a piston.

View attachment 222799

Interested in selling that saw?

 

[Lightning Performance]

Interested in selling that saw?

No.
Just trying to help out Mason and his guy.
These 1128 saws will see my small mill.

What would you offer?....

Most people think I'd let them go cheap. Not happening. Have all the goodies including a new oe tank handle Whole motor is perfect on one....tank handle was broke at the rear. The other needs a piston only. OE pistons here waiting.

 

[mikerudder]

No.
Just trying to help out Mason and his guy.
These 1128 saws will see my small mill.

What would you offer?....

Most people think I'd let them go cheap. Not happening. Have all the goodies including a new oe tank handle Whole motor is perfect on one....tank handle was broke at the rear. The other needs a piston only. OE pistons here waiting.

Sounds like you need to build a good one then send the rest of the parts my way. I like building them from scratch!

 

[Lightning Performance]

Not going to be many extras. Doing the oil pump dance down to 361. The tank for other saw is a patch up job I begged for from the trash can. Smashed tail, meh. It's a mill....
I will have some 361 and maybe 460 plastics.

I do need another set of HD 1128 oil pump gears.

Send a PM. Gives me a place to refer to when the parts become available. Only have one extra 52mm oe jug. Keepin that one for a spare. Noting great just a last years Stihl jug.