High Quality Chainsaw Bars Husqvarna Toys

Stihl MS362C-M - Torquing Cilinder Bolts

Mark362

OPE Member
Local time
12:35 PM
User ID
9146
Joined
Apr 1, 2019
Messages
4
Reaction score
0
Location
Netherlands
Hello all,

I’m new to this Forum and trying to find out how to easily reach the cylinder bolts for torquing them within 10-20 Hrs use.

I added a picture of the “holes” (marked with red arrows) which i suppose are ment to go through with the T27 tool.

Am i right?

Thanks in advance!IMG_4479.jpg


Verzonden vanaf mijn iPad met Tapatalk
 

DND 9000

Pinnacle OPE Member
Local time
12:35 PM
User ID
800
Joined
Feb 6, 2016
Messages
725
Reaction score
1,617
Location
Germany
Country flag
Mark the screws are on the bottom of the cylinder. To reach the screws, the air guide shroud, carburetor etc have to be removed. A T27 screwdriver is required for the cylinder screws.
upload_2019-4-28_14-49-39.png
 

Mark362

OPE Member
Local time
12:35 PM
User ID
9146
Joined
Apr 1, 2019
Messages
4
Reaction score
0
Location
Netherlands
DND 9000, thanks!

I found this in an earlier post from Mastermind (see pic)

So this isn’t IMG_1617.jpgthe right way?


Verzonden vanaf mijn iPad met Tapatalk
 

DND 9000

Pinnacle OPE Member
Local time
12:35 PM
User ID
800
Joined
Feb 6, 2016
Messages
725
Reaction score
1,617
Location
Germany
Country flag
Well according to your picture it seems possible to do it like this. I have no MS 362 and I had a look to the service manual. To remove the cylinder some parts have to be dismanteld, but you only want to tighten the screws. Now I think my first advise was wrong, try it like Mastermind did in the picture.
 

Mark362

OPE Member
Local time
12:35 PM
User ID
9146
Joined
Apr 1, 2019
Messages
4
Reaction score
0
Location
Netherlands
DND 9000

Thanks again,

I want to know if these “holes”, they’re not really open in de first place, are ment for this.

It seems so but i want to know for sure because if i put my tool through, i make holes of them. Then the sealed compartiment loses it’s function.[emoji6]

Mark


Verzonden vanaf mijn iPad met Tapatalk
 

DND 9000

Pinnacle OPE Member
Local time
12:35 PM
User ID
800
Joined
Feb 6, 2016
Messages
725
Reaction score
1,617
Location
Germany
Country flag
I don`t know. I haven`t found anything about that.
 
Top