High Quality Chainsaw Bars Husqvarna Toys

Stihl 090 info

Jughead

Pinnacle OPE Member
Local time
5:42 AM
User ID
293
Joined
Dec 28, 2015
Messages
1,515
Reaction score
3,214
Location
37640
Country flag
Post up any info on the 090.differences between the years etc.etc.etc.
 

Carhartt

Super OPE Member
Local time
5:42 AM
User ID
1712
Joined
Aug 18, 2016
Messages
654
Reaction score
891
Location
Central Pa
Country flag
I have an 070 id like to convert someday. Mine does not have any AV on it. I replaced the chain cover with new aftermarket, so that doesn't match the saw. Too shiny white.
 

TimRD

Makin' Little Ones Out of Big Ones
Local time
5:42 AM
User ID
1574
Joined
Jul 21, 2016
Messages
183
Reaction score
542
Location
Irwin, PA
There's my baby. Just a plain 090, one of the earlier ones with the name cast in the recoil. Only had one dog, so I got a AM set. Bone stock otherwise. The next gen had a Stihl logo riveted on, and the later ones have a small orange Stihl logo on the recoil.

To my knowledge, the wrap 090's (like mine) and the 090G (070 with a 2:1 gear reduction) came with 1/2" pitch from the factory. I swapped mine out to .404" after I got it.

20160910_222644.jpg
 

Carhartt

Super OPE Member
Local time
5:42 AM
User ID
1712
Joined
Aug 18, 2016
Messages
654
Reaction score
891
Location
Central Pa
Country flag
Mine looks exactly like yours except for the riveted logo. Mine is also .404. I need the chain cover dog for mine yet. I have an old 30 in Stihl bar on mine. For some reason Stihl is the only manufacturer that I can find a big bar that will fit. Oregon doesn't make any to fit that I am aware of. I am sure I cld modify one to fit.
 

TimRD

Makin' Little Ones Out of Big Ones
Local time
5:42 AM
User ID
1574
Joined
Jul 21, 2016
Messages
183
Reaction score
542
Location
Irwin, PA
Any bar that will fit an 880/084/088 will work on these beasts. I have a GB that will fit, and they still make large mount Stihl bars, and a few older Oregon bars. You can look for an old roller nose bar too as they seem to be more common in the large mount Stihl.
 

Aciera

Super OPE Member
Local time
5:42 AM
User ID
2025
Joined
Oct 24, 2016
Messages
154
Reaction score
308
Location
Central PA
Any bar that will fit an 880/084/088 will work on these beasts. I have a GB that will fit, and they still make large mount Stihl bars, and a few older Oregon bars. You can look for an old roller nose bar too as they seem to be more common in the large mount Stihl.
The 084/088/050/052/075/076 are not all the same.
Some will work and the others can be modified with a drill.....just sayin.....
 
Top