SOLD NLFS

[Johnmn]

#1 is a 630 super, saw runs well.
Has new o-rings, seals, gaskets, carb kit, fuel line and filter. Has muffler opening enlarged, base delete and timing advance. Saw has Tilly 224 carb without fast idle.
$225 plus shipping



#2 is a 670 super ii, saw is not broken in yet and still getting stronger.
It's been completely rebuilt, bearings, seals, oiler, clutch, fuel line and filter, inpulse line, carb kit, gaskets, has lil red Barn pop up piston with oem ring, circlips and bearing. Also has timing advance, muffler mod and Base delete.
$300 plus shipping

I am also building a 625 with a 272 p&c if anyone is interested. And have boxes of parts, enough to build 2 saws. Pics to follow.

 

[Warped5]

Trusted seller here!

GLWS

 

[Johnmn]

670

 

[Johnmn]

630 piston

 

[cuinrearview]

Trusted seller here!

GLWS

+1

 

[Johnmn]

Sorry guys I had a momentary lapse of insanity!

 

[WKEND LUMBERJAK]

Sorry guys I had a momentary lapse of insanity!

It happens.

 

[Johnmn]

672, new bearings, seals, o-ring, meteor piston, gaskets, intake block, fuel line and filter, mahle 272 cylinder, base delete, timing advance. Ran 1 tank through it, it needed a carb kit. I ordered one but haven't received it yet. Has modified spring AV on front mounts.
$300 plus shipping

 

[Johnmn]

Project 625 plan on a full rebuild.
$75 plus shipping
I have other 625 cylinders and a 670 cylinder. Also have a saw in a box that probably 90% there.

 

[Johnmn]

Here's the status of the 288 all parts have been ordered.

 

[Johnmn]

Mainly looking to downsize to a usable bunch. But I am interested in a dolmar 64/73/7900 or in the Smurf variety.

 

[stihl livin]

@Dub11

 

[Johnmn]

Pulling the 672 off, I rebuilt the carb but it's still not running quite right. I'm wondering if it's got a weak impulse?