Nutball
Here For The Long Haul!
- Local time
- 5:49 PM
- User ID
- 7732
- Joined
- Oct 31, 2018
- Messages
- 4,042
- Reaction score
- 11,036
- Location
- Mt. Juliet, TN
I widened the bottom of the intake, raised the exhaust 5 degrees, and bumped up the compression a smidge. The first cut was easily .5 to 1 second faster, but got slower as it heated up, I already had it warmed up before cutting. Kinda hard to tell if it gained anything. I think the key to a 590 is the intake duration with such a small carb and boot.
One thing is for sure, it has no problem running a 20" bar in half dry hard wood.
One thing is for sure, it has no problem running a 20" bar in half dry hard wood.
Last edited:
