Saw video thread

[RI Chevy]

Thank you sir. Time for new clutch springs tho lol

How does one tell when its time for new clutch springs? What does the saw do?

Sent from my SM-G930V using Tapatalk

 

[T.Roller]

How does one tell when its time for new clutch springs? What does the saw do?

Sent from my SM-G930V using Tapatalk

Once I make a cut or two the chain will spin at idle without a change in rpm.

 

[TreeLife]

The chain will run like it doesn't have enough tension...all the time, if it has broken spring. I've seen some wear grooves into the clutch basket and lose contact area.

 

[RI Chevy]

OK. Thanks for the info. [emoji106]

Sent from my SM-G930V using Tapatalk

 

[GeorgiaVOL]

Here are 3 saws I recently got going plus a ported 350 I got from t4driller. All cutting seasoned 12" red oak beams.

 

[Rob Stafari]

Cross performance/farmertec. 32" bar with 33RS. Very dead standing hickory that came down last week.

 

[Rob Stafari]

 

[whitesnake]

Here are 3 saws I recently got going plus a ported 350 I got from t4driller. All cutting seasoned 12" red oak beams.

That 350 .325 I'm assuming? Or 3/8? Got a 346 I need to build I'd like to run 18" 3/8 as I have an abundance of chains. I know not a great reason but still lol

 

[GeorgiaVOL]

It's a .325. I understand your thinking. I like to run saws with the same chains so I can buy them in bulk packages. That's why the 55 is wearing a .325. I like the setup better anyway. Next up in Goi,g to do a 24" shootout. 285CD vs. P41 vs. Homelite XP1020

 

[Canadian farm boy]

Still working on this saw. Got a couple things left to try. Here's a couple of its first cuts after porting.

 

[RI Chevy]

Sounds real strong Mike. Nice job [emoji106]

Sent from my SM-G930V using Tapatalk

 

[PA Dan]

I like it!

 

[RI Chevy]

Mike really builds a nice Hybrid!

 

[Backtroller]

You can say that again!

 

[Time's Standing Stihl]

Mike really builds a nice Hybrid!

Mehhhh.....we'll see [emoji6]

@Canadian farm boy

 

[RocketRoss57]

 

[Manofstihl066]

Been messing around with some Stihl square. I wasn't to impressed with it out of the box but after filing it myself and setting the rakers where I like, it cuts well. Even after 3 tanks it held a good edge. Here it is cutting some hard dry red oak. 32" bar with 8 pin rim.

 

[maulhead]

Just messing around.

261c is on it's 2nd tank, totally stock.

461 is on it's 4th tank, and has a 460 coil & muffler mod.

 

[maulhead]

MMWS 460

 

[GCJenks204]

Just messing around.

261c is on it's 2nd tank, totally stock.

461 is on it's 4th tank, and has a 460 coil & muffler mod.

261 looks good for not broken in yet. What size bar/ chain do you have on it?