Saber bars

[Frankavich84]

Does anyone have the code for deciphering these bars and what fits what?


Sent from my iPhone using Tapatalk

 

[Deets066]

Picture of the bar and the numbers on it will help

 

[Wagnerwerks]

I might have a saber book. Show us what vintage and the mount and we can likely tell you.

 

[Frankavich84]

I might have a saber book. Show us what vintage and the mount and we can likely tell you.

H06325r is the number on it


Sent from my iPhone using Tapatalk

 

[Wagnerwerks]

That doesn't fit anything you have... Send it to me.

 

[Wagnerwerks]

Looks like a pioneer mount. I'll check for the book.

 

[Frankavich84]

Looks like a pioneer mount. I'll check for the book.

Well you might be right. I have Stihls. If it won’t work for me I’ll tell you all where it is lol


Sent from my iPhone using Tapatalk

 

[Wagnerwerks]

Well you might be right. I have Stihls. If it won’t work for me I’ll tell you all where it is lol


Sent from my iPhone using Tapatalk

Perfect

 

[Wagnerwerks]

Not looking good. I think my sabre manual was in a binder I gave away. It might be out in my shop, but it's a long shot.

 

[Frankavich84]

Not looking good. I think my sabre manual was in a binder I gave away. It might be out in my shop, but it's a long shot.

Well if it is pioneer can it be milled to work on 12 or 24 mm stihl?


Sent from my iPhone using Tapatalk

 

[Frankavich84]

Well if it is pioneer can it be milled to work on 12 or 24 mm stihl?


Sent from my iPhone using Tapatalk

I mean 14mm


Sent from my iPhone using Tapatalk

 

[Frankavich84]

Well I’m guessing someone on here found it and bid on it. Not very nice...


Sent from my iPhone using Tapatalk

 

[Wagnerwerks]

You can make any bar fit any saw as long as the rear profile is right. The rest is just slots and holes. I've had to weld an oiler hole shut to keep it from losing oil, but it still works. So let's get down to the nitty gritty... How much you gonna bit?

 

[Bigmac]

I would guess by the numbers ho=homelite 63 gage and 25” but only a guess

 

[Frankavich84]

You can make any bar fit any saw as long as the rear profile is right. The rest is just slots and holes. I've had to weld an oiler hole shut to keep it from losing oil, but it still works. So let's get down to the nitty gritty... How much you gonna bit?

Well that’s the last time I’ll ask for help pre purchase on here. Low blow, thought there was more chivalry here.


Sent from my iPhone using Tapatalk

 

[huskihl]

Well I’m guessing someone on here found it and bid on it. Not very nice...


Sent from my iPhone using Tapatalk

Well that’s the last time I’ll ask for help pre purchase on here. Low blow, thought there was more chivalry here.


Sent from my iPhone using Tapatalk

Seems harsh. EBay is visible all over the world and you're blaming 10 or 20 guys on here for bidding on a bar?

 

[Frankavich84]

Seems harsh. EBay is visible all over the world and you're blaming 10 or 20 guys on here for bidding on a bar?

No bid for 48 hours, bid gains time 20 min after posting the numbers on the listing. Seems a little ironic.


Sent from my iPhone using Tapatalk

 

[Frankavich84]

Additionally I never said it was on a bidding site. I’m assuming that is what was being said when it was stated “the question is how much are you gonna bit?”


Sent from my iPhone using Tapatalk

 

[Jon1212]

I would guess by the numbers ho=homelite 63 gage and 25” but only a guess

That would appear to be correct. However, based off the tail shape in the one picture, it looks like an F014 and not the more prevalent D196.

 

[Jon1212]

Well that’s the last time I’ll ask for help pre purchase on here. Low blow, thought there was more chivalry here.


Sent from my iPhone using Tapatalk