RPM to set High idle screw on Stihl 026?

[Blackgreyhounds]

Just a quick check on RPM recommendation for setting H screw on a stock 026? I'm not super good at hearing 4-stroke vs. 2-stroke. Thanks.

 

[qurotro]

So... Buy a tach..

 

[Ryan Browne]

It's gonna be in the 12,500-13,500 range. If you're limbing and cutting small stuff you can turn it up to the higher end of that or even a hair past. For bucking firewood, richen it up a little.

 

[brad ruch]

026 is 14000 max

Sent from my Pixel 2 XL using Tapatalk

 

[ray benson]

Just a quick check on RPM recommendation for setting H screw on a stock 026? I'm not super good at hearing 4-stroke vs. 2-stroke. Thanks.

L and H initial screw setting is 1 turn open from lightly seated. Page 64 in service manual.

 

[Blackgreyhounds]

So... Buy a tach..

I have a tach. That's why the title asks for RPMs.

 

[dmb2613]

set it at 13000 and it should be good