Reloading swap thread.

[Carhartt]

I am sure I can find a bunch of once fired .40 smith and 38 special brass. If I really dug in some boxes I am sure I can find a lot more brass.
I am looking for a .308 bullet mold with gas check. I have a M1 Garand id like to make some plinkers.
Wagner, what is this checkmakr you speak of? I think I remember seeing blank checks before.

 

[Wagnerwerks]

I'll have to look again. I found it with a Google search. It's a little punch and a form that makes the checks.

 

[srb08]

I'll have to look again. I found it with a Google search. It's a little punch and a form that makes the checks.

Here's the link. Pat Marlin makes some handy tools.
The gas check tool is about half way down the page.
https://www.patmarlins.com

 

[Wagnerwerks]

Anyone have any 357 max or 360 Dan Wesson brass? I just ordered a traditions outfitter in 357mag and plan to ream it to 357max. I've been pining over this rifle for a while and I'm pretty excited to get into this... . I have not found any other 357 rifles for sale under the new price of this one for 3 years.... Crazy no one Chambers a break barrel in this caliber other than these guys and Henry.

 

[srb08]

Anyone have any 357 max or 360 Dan Wesson brass? I just ordered a traditions outfitter in 357mag and plan to ream it to 357max. I've been pining over this rifle for a while and I'm pretty excited to get into this... . I have not found any other 357 rifles for sale under the new price of this one for 3 years.... Crazy no one Chambers a break barrel in this caliber other than these guys and Henry.

Fired brass in either chambering is tough to find.
Fortunately, Starline has new brass for both, but it ain't cheap.
https://www.starlinebrass.com/order-online/all-cases.cfm

 

[Wagnerwerks]

Fired brass in either chambering is tough to find.
Fortunately, Starline has new brass for both, but it ain't cheap.
https://www.starlinebrass.com/order-online/all-cases.cfm

That's what I was looking at too. I was hoping someone may have some to sell or swap.

I'm going to put a post up over on cast boolits too.

 

[460 magnum]

Any one have any 6.5 creedmoor dies

 

[Fresch]

Anyone have any 357 max or 360 Dan Wesson brass? I just ordered a traditions outfitter in 357mag and plan to ream it to 357max. I've been pining over this rifle for a while and I'm pretty excited to get into this... . I have not found any other 357 rifles for sale under the new price of this one for 3 years.... Crazy no one Chambers a break barrel in this caliber other than these guys and Henry.

Get your brass? Gun Broker has some now 5/8/19

 

[Carhartt]

I did. I ordered 200 pieces of Win from Graff. I weighed and separated, but never got back to working with it. Too many hobbies. It has claimed 1 groundhog this spring so far. Chip shot, nothing worth bragging about. 57gr vmax.

 

[Wagnerwerks]

Yes sir. I'm shooting a 1" group at 50yrds with 158g sjfp at I'm around 1750fps. I'm going to try to work up a load with some pointy ones soon...

 

[Wagnerwerks]

Right now I'm looking for a carry pistol for my wifey... Anyone need a saw and want to trade? Small 380? This is my latest gun want...

 

[ramrat]

Bring this back. Anyone have a single action press they want to sell or trade. Just getting started in reloading and have a bunch of military brass 30-06 to take the primers out of. I have a buddy that going to help me with reloading them. Just want to have them cleaned and primer cups ready to go.

 

[Old Grouchy]

I wouldn't waste much time looking for a used press. Titan reloading has the Lee breach lock Challenger press on sale for like $72. Add a couple breech lock bushings and maybe a lee universal decapping die and you can have the whole thing shipped to your door for a little over $100.

I have had mine for many years and it just works like its supposed to. Its loaded many many rounds too.

I will say that you need to keep the slot in the ram cleaned out every now and then or the primer arm will hang up and not let the spent primers drop where they go into the tube. Clean brass helps eliminate that though.

Don't like Lee then get the Hornady with the loc bushings.

I got rid of most of my other single stage presses over the years and just kept the Lee. I would never have another without the quick change bushings.

They make it so easy to switch dies and not have to readjust every time.

 

[Old Grouchy]

Anyone need any 06 brass? I got 100 pcs of once fired LC brass from the civilian marksmanship program. Plus I think I have another 40 pcs of mixed HS military brass.

All have been wet tumbled, sized, trimmed, primer crimps removed and then dry tumbled.
I would trade for some 45 colt or 44 Mag brass.

 

[ramrat]

Anyone need any 06 brass? I got 100 pcs of once fired LC brass from the civilian marksmanship program. Plus I think I have another 40 pcs of mixed HS military brass.

All have been wet tumbled, sized, trimmed, primer crimps removed and then dry tumbled.
I would trade for some 45 colt or 44 Mag brass.
View attachment 331927

You still have this 30-06 brass?

 

[Old Grouchy]

You still have this 30-06 brass?

Sorry that ship has sailed. I'm full up on .40SW brass though.

 

[blacksmith]

I was going through some boxes of brass and found the following:

100- new RP 300 Win Mag
200- new RP 25-06
100- new RP 7mm-08
200- mixed once fired commercial boxer primed brass in 7.62x39

I have other brass, just need to sort through it.

I'm looking for 45-70 brass and bullets.
I can possibly use other stuff, just can't think of it at the moment.

How much for the 100 count 7mm-08 brass?
That is if you still have it.... send me a PM and let me know either way.

 

[ramrat]

looking for used reloading tools guys if anyone has anything under there bench they want to sell let me know. Thanks

 

[srb08]

How much for the 100 count 7mm-08 brass?
That is if you still have it.... send me a PM and let me know either way.

Sorry, it’s gone

 

[blacksmith]

Sorry, it’s gone

That's ok, I figured it was worth a try.