ported 661 baffle in muffler vs baffle out

[tree monkey]

I went to mi last year

 

[jmssaws]

I went to mi last year

That's right
Clint Davis said he talked to you there
Where in iowa?

 

[tree monkey]

Here's the addy for those that don't know.

3507 v Ave,Chelsea, Iowa 52215

 

[jmssaws]

Here's the addy for those that don't know.

3507 v Ave,Chelsea, Iowa 52215

When?

 

[tree monkey]

http://opeforum.com/threads/2017-iowa-gtg.5672/

 

[jmssaws]

What length bar you like?
If I find some parts somebody borrows me one I can port accordingly.

 

[tree monkey]

i'm open to anything, Julie ann's saws are ported for long bars, 42" and longer

 

[jmssaws]

I've done them from 95 to 101 but don't really have any wood to try a long bar in much so I always use a big sprocket and a 24".
The 95 saw is definitely faster with a 24" but I don't know which would run a really long bar best,the 98 saw seemed strongest overall but without them together I can't really tell.
They all kinda feel the same

 

[jmssaws]

This saw i just did Is for a tree service and will run a 42" mostly.
Biggest bar I have is a 32" 404 and a 36" 3/8 so I'll have to imagine that it's longer than it really is which I have no problem doing.

 

[Definitive Dave]

short bars rule, long bars are dumb

 

[jmssaws]

short bars rule, long bars are dumb

I kind of agree because long bars take to much wood and wood is hard to come by.

 

[paragonbuilder]

short bars rule, long bars are for dumb guys

[emoji19]
Me dumb... too much big wood here for short bars...

 

[Definitive Dave]

big bars bah humbug

 

[Redbull661]

i'm open to anything, Julie ann's saws are ported for long bars, 42" and longer

it's Julie Annie get it right! I gots two personalities remember! I know you said that was normal, but...

short bars rule, long bars are dumb

short bar?

 

[CR888]

If your gonna time cuts against TM saws you should bring the 'maxed out cylinder' saw not the pop-saw.

 

[Cigmaker]

it's Julie Annie get it right! I gots two personalities remember! I know you said that was normal, but...



short bar?

If it's short you need girth.

 

[TJ the Chainsaw Mechanic]

Oh you are a sick man.


Rep for you.

I'm actually pretty healthy. lol

 

[thomas1]

i'm open to anything, Julie ann's saws are ported for long bars, 42" and longer

What bar gearing?

 

[Definitive Dave]

it's Julie Annie get it right!

Aren't you mayor of new york?

 

[X 66 stang347 X]

You can keep De Blasio up there