Point Me to a 3/8" Bar for 025

[B440]

I'm trying to find a bar that will work on an 025/MS250. It's gotta be 3/8" regular, not lopro or picco. At least that is the way I understand it from reading various posts; Lopro and picco drive links don't quite fit right with regular 3/8 chain?

I'd like an 18 bar, but 16 would also work. Square chisel is going on it.

 

[CR888]

You need the Stihl bar chart to find what options you have for Stihl bars. MS250 is 3005 mount? Like the little saws.

 

[B440]

Yeah it's a little saw, and Stihl only recommends 0.325 or smaller chain for it, for obvious reasons....

 

[RI Chevy]

You might be able to get a Tsumura bar in .325 for the mount to fit your saw then change the tip from .325 to 3/8. And match the rim.
Maybe shoot Nate a PM and see what he has.

 

[B440]

I'd be willing to entertain that idea. Who is Nate?

 

[RI Chevy]

FordF150
https://performanceoutdoorequipment.com/m/index.htm
Just hit the Tsumura tabs for the mount you are looking for.

Please excuse me, but were you running that MS250 with the pipe in CT?

 

[B440]

Yes, still in CT and still smoking, err, running the pipe.

 

[RI Chevy]

Lol. Cool

 

[Dub11]

If I'm not mistaken and saying this right the A074 which being an A pattern for the bar tail is almost identical to the K pattern bar tail in Oregon speak. So you could find a K095 3/8 and make it work with a little filling for the adjuster hole.

@Jon1212 did I say this right?