SOLD Oregon roller nose bar

[how57]

I not sure on the mount. Bar is 40" overall in length. The tip is solid. It has an old repair and a crack at the tip. I only put one rivet in. Looks like it could be fully restored by the right guy. Any help on the mount would be appreciated. Open to offers or trade possibly.

 

[RandyMac]

WEEED!

 

[how57]

WEEED!

Where are you?

 

[jacob j.]

That looks like large Mcculloch mount (125, 797, 795, etc).

 

[how57]

That looks like large Mcculloch mount (125, 797, 795, etc).

I was leaning towards Homelite.

 

[RandyMac]

I'm over the hill from you, Crescent City.

 

[how57]

I'm over the hill from you, Crescent City.

Nice.

 

[RandyMac]

It is, unless you are looking for work.

 

[Lee H]

Older Homelite mount for the big saws like 1050,2000,2100, all the C series,and many geardrives
will also work on the Mac's as JJ mentioned.

 

[Jon1212]

Older Homelite mount for the big saws like 1050,2000,2100, all the C series,and many geardrives
will also work on the Mac's as JJ mentioned.

Interesting.... I didn't realize there was a Homelite mount that oiled through the adjuster holes? Any idea on stud slot width, Lee?

So would this bar also work on some of the larger Poulan/Pro/Partner and Echo saws?

Was .058 standard back in the day?

 

[Lee H]

Slot is 3/8. All the rollers I have seen with that style square adjusted hole was on a Homelite.
Not sure what other saws it will fit as I have them on Homelites. 058 was very common way
back in the day.

 

[how57]

Interesting.... I didn't realize there was a Homelite mount that oiled through the adjuster holes? Any idea on stud slot width, Lee?

So would this bar also work on some of the larger Poulan/Pro/Partner and Echo saws?

Was .058 standard back in the day?

You wanna trade? I'd take a 28" or 32" Stihl bar with decent lettering. Straight across.

 

[Jon1212]

You wanna trade? I'd take a 28" or 32" Stihl bar with decent lettering. Straight across.

Let me see what I can come up with. 3/8 050 or 063?

 

[how57]

Let me see what I can come up with. 3/8 050 or 063?

Either. I'll make it worthwhile.

 

[Jon1212]

Either. I'll make it worthwhile.

Which would you prefer?

 

[how57]

Which would you prefer?

If I had to choose. .050

 

[Deets066]

@Redfin

 

[Redfin]

Thanks Deeter but I have a
42".

 

[Jon1212]

If I had to choose. .050

Okay.

 

[Jon1212]

Where did this bar end up?