SOLD Or trading Oregon Powercut 32” .050 large Stihl mount

[mrxlh]

Somehow I ordered a large Stihl mount 32” .050 bar. If anyone is looking for one or has a large mount Husky 32” .050 new, or really low use I’ll trade. $80 plus the ride or straight trade each covering their own ride.

 

[woodfarmer]

Buy the adapter for $12

 

[mrxlh]

That won’t stretch the chain though…

 

[Mycamaro_68]

That won’t stretch the chain though…

Are they not both 105dl?

 

[mrxlh]

When you go Stihl on Husky, you need one more link…

 

[Mycamaro_68]

When you go Stihl on Husky, you need one more link…

I didn't realize that, I'll have to keep that in mind.

 

[huskihl]

When you go Stihl on Husky, you need one more link…

You can lengthen the slot to husky length and it will work with an adapter

 

[mrxlh]

You can lengthen the slot to husky length and it will work with an adapter

I’ve thought about that as well as a certain 461….

 

[mrxlh]

You can lengthen the slot to husky length and it will work with an adapter

Thanks Kevin, this is what I ended up doing, ordered an adapter from Mike.

 

[huskihl]

Thanks Kevin, this is what I ended up doing, ordered an adapter from Mike.

Should have mentioned you’ll probably need to enlarge the tensioner hole. Some need it and some don’t

 

[mrxlh]

Should have mentioned you’ll probably need to enlarge the tensioner hole. Some need it and some don’t

I’ll look when I’m out there today, I found out yesterday the stud spacing of a 3120XP is different than the 395 and down…

 

[huskihl]

I’ll look when I’m out there today, I found out yesterday the stud spacing of a 3120XP is different than the 395 and down…

Huskies are all over the place. There are several that the standard adapter doesn’t fit

 

[Woodslasher]

Should have mentioned you’ll probably need to enlarge the tensioner hole. Some need it and some don’t

With an Oregon Powercut Pro bar the 362/365/372/385/390 clutch cover and the J-red variants need the holes enlarged, I found that out when I mounted one on my 390.