Need saw chain

[Boomer 87]

May be more of a wanted ad, but itll get more traffic here. Whose a good guy/dealer on here for new saw chain. Need a 32". Needs to be 3/8" pitch .050 ga 105 Dl. Its going on a 576 so im thinking id like to try a skip chain. Never run skip anything before. What say yee?

 

[bagpipingtrucker]

Frawleys saw shop. (563)544-4498

Homelite collector in training [emoji879]

 

[huskihl]

@Redbull661 might have what you need

 

[cuinrearview]

Dsell over on the other site(and maybe here) usually has some good deals Cody.

 

[Wolverine]

I use https://www.loggerchain.com/main.sc (Frawleys).

 

[David _4]

Frawleys

 

[bagpipingtrucker]

See Frawley's is the go to guy, he'll spin ya whatever you need and will explain to you the skip vs semi vs full chain.

Homelite collector in training [emoji879]

 

[RI Chevy]

Maybe check with @radio as well

 

[Boomer 87]

Thanks everybody

 

[Dub11]

I got a used loop of LGX if you're interested.

 

[David _4]

I run Oregon APX which is a full skip, semi chisel chain on my 24" and 28" bars. Semi chisel because I typically cut dirty logs and full skip because there are less teeth to sharpen at the landing. APX can be a bit tough to find in stock and I haven't found anyone close to me that carries it. Frawley's Saw Shop always has it in stock. He also has a store on Ebay, which is where I usually buy it from. https://www.ebay.com/itm/111830060151

 

[radio]

I have some Oregon 72AP which as mentioned by David is semi-chisel full skip chain. If you want to try square ground chain I have it in skip, semi skip and regular sequence.

 

[Boomer 87]

So you guys think i should go skip on a 576 in 32" or would it pull full comp ok? Ive never run skip chain on anything, its just not popular in my area it doesnt seem

 

[bagpipingtrucker]

The owner of Frawley's will give you plenty of information about chains.

Homelite collector in training [emoji879]

 

[Boomer 87]

OMG what an idiot lol, i have a breaker/spinner and like 25-30 loops of full chisel hanging that i can brake and mend them together. Man my memory is bad lately

 

[Dub11]

OMG what an idiot lol, i have a breaker/spinner and like 25-30 loops of full chisel hanging that i can brake and mend them together. Man my memory is bad lately

Lol


Oh and didn't I sell you a JD 800 awhile back?

 

[Boomer 87]

Lol


Oh and didn't I sell you a JD 800 awhile back?

Yes you did, i still have it

 

[RI Chevy]

So you guys think i should go skip on a 576 in 32" or would it pull full comp ok? Ive never run skip chain on anything, its just not popular in my area it doesnt seem

Maybe try semi-skip? You'll only lose 1/3 of the cutters instead of 1/2 of the cutters.

 

[qurotro]

Maybe try semi-skip? You'll only lose 1/3 of the cutters instead of 1/2 of the cutters.

With angle grinder, you can get whatever skip you want.

 

[RI Chevy]

I prefer factory type chains, not something that is hacked up. Just me...
If it works for you, keep with it. [emoji106]