SOLD MMS 5105H and 5105.

[Miller Mod Saws]

Ok guys. I have 2-5105s. First one up is my personal saw. It's a 5105H. Hasn't had a lot of run time on it from me. Originally I bought this from @stihl livin. Saw#2 is a combination of saws. I took a 5100S with a brand new top end but crank bearings had spun in the case and a 5105 with a lightly scored top. Ported the newer P&C and put it one the 5105 but used the 5100 muffler. Both saws are ported.
Saw-1. $675 PHO
Saw-2-$525 PHO
Shipping to lower 48 included. PayPal F&F or add 4%.

 

[Miller Mod Saws]

Saw #1. 5105H

 

[Miller Mod Saws]

Vid of saw #1. Running 3/8"-20 bar in walnut.

 

[Miller Mod Saws]

Saw#2. This one is in good mechanical shape but has some scratches and missing paint.

 

[Miller Mod Saws]

Here's a very bad vid of saw 2. But I was just tuning it fresh after rebuild. Not to mention don't watch the second half of the vid. Cause the solo makes it look super slow. Lol.

 

[Miller Mod Saws]

(SOLD) Heck let's make it saw #3. This is a heated handle 5100s. The doner for saw#2. I can tell you for sure the bearing is spun in the case on the clutch side. It needs a new intake boot. The P&C are actually pretty good. I'll show ya what I mean. But I am selling as a parts saw for someone that may want to make there 5100 a heated handle 5100. Lol.
The slight black carbon scoring is all that's wrong with this top end it's on both cylinder and piston but as you can see. It's not bad at all.
$125 shipped.

 

[kingOFgEEEks]

What all is involved in converting a 5100 to heated? Do I need to split the case, or just take a bunch of parts off & replace with the heated parts?

 

[angelo c]

Damn you Carl I so badly want a "H" "G" "W" or what ever a heated handle is...

is the parts saw complete...minus a "case" for all intents and purposes ?
and can you get me a case for how much more ?
swap the parts and have a "H"....

 

[Miller Mod Saws]

What all is involved in converting a 5100 to heated? Do I need to split the case, or just take a bunch of parts off & replace with the heated parts?

As long as your cases are tapped for the generator it should just be part swapping.

 

[Miller Mod Saws]

Damn you Carl I so badly want a "H" "G" "W" or what ever a heated handle is...

is the parts saw complete...minus a "case" for all intents and purposes ?
and can you get me a case for how much more ?
swap the parts and have a "H"....

Lol. H=heated,
Yes both saws where running when I made one out of them. Then i stole the intake boot. On the case I'd just have to see what a new one costs.

 

[Miller Mod Saws]

Bump

 

[WKEND LUMBERJAK]

Guys Carl builds a mean 5105 don't be afraid of it they are true Runner. Excellent firewood saws

 

[Miller Mod Saws]

Saw #3 sold. Thanks guys.

 

[WKEND LUMBERJAK]

Thats great Carl.

 

[Miller Mod Saws]

Thats great Carl.

Well hello my man. 1 down. 2 to go.

 

[husky362]

Bump for Carl he has built a new 6421 and ported a Husky for me Good Guy

 

[Miller Mod Saws]

Bump for Carl he has built a new 6421 and ported a Husky for me Good Guy

Thank you.

 

[shorthunter]

Guys Carl builds a mean 5105 don't be afraid of it they are true Runner. Excellent firewood saws

Strongest 5100 or 5105 I have ever run

 

[Miller Mod Saws]

These saws are still for sale. But just so y’all know I’ve put them into the work circulation. The heated handle saw is what I’m cutting firewood with and the other one. Well I’ve been using it to clear road trees for the township.
They have a 210 stihl. And that’s not for this guy. Lol.

 

[Woodpecker]

@Armbru84 Didn't you say you needed more small saws to even out all the 70+cc saws you have? Heated handle too!