fordf150
Pinnacle OPE Member
- Local time
- 1:33 AM
- User ID
- 591
- Joined
- Jan 18, 2016
- Messages
- 865
- Reaction score
- 3,452
- Location
- Newcomerstown ,Ohio
heres the list. couple new, couple rebuilt, some used, plenty of parts saws. most of the parts saws will be posted in seperate listing. cleaning up the shop before i move to the new building in couple weeks.
send a message, if i havent replied within a few hours CALL the shop 740-492-4002. we have been super busy and with starting to pack up and clean up its even worse right now
prefer PPFF
shipping add $25 if your on the east coast. west coast will check shipping cost but most locations will be closer to $40
new
x1 5105H PHO dirty from sitting around and a few scuffs on the bottom $375
x2 7901(heated handle w/HD filter PHO $825
used:
Hilti DSH700 concrete saw. runs good, new piston ring, belt, clutch springs, air filter. 1 air filter bolt is stripped out $300
Makita DCS7311 concrete saw. runs good. new recoil and IIRC new air filter $300
Stihl TS400, runs and works but has some minor piston scuffing/scoring. $300
Hilti comes with a well used diamond wheel, the other 2 do not have wheels with them. all 3 are 14".
Dolly 5100S, completely rebuilt back around January. all OEM parts, P&C, bearings, seals, fuel line, filter, air filter, carb, 16" .325 B&C, maybe 3-4 tanks on it...@jmester rebuilt it and ran it so maybe he can chime in with a more exact run time. $275
Dolly 115i. very nice condition saw, I bought it to use as a shelf queen so never cut with it but it fires right up and a quick once over has everything appearing to work as it should. 487 total super bar(18" 3/8 .058 64DL) with a couple extra chains $225
024 AV has an air leak or needs carb rebuilt(been 3-4 years since i messed with it) but has an almost new 16" B&C. been 3-4 years since i messed with the 024AV so cant remember for sure what is wrong with it but it was minor. $150????
024WB new OEM fuel line, impulse line, fuel filter, carb kit and a Meteor piston.....i think possibly seals are new but cant remember....doesnt hold a tune IIRC but its been 6 months or so since i messed with it. $175???
send a message, if i havent replied within a few hours CALL the shop 740-492-4002. we have been super busy and with starting to pack up and clean up its even worse right now
prefer PPFF
shipping add $25 if your on the east coast. west coast will check shipping cost but most locations will be closer to $40
new
x1 5105H PHO dirty from sitting around and a few scuffs on the bottom $375
x2 7901(heated handle w/HD filter PHO $825
used:
Hilti DSH700 concrete saw. runs good, new piston ring, belt, clutch springs, air filter. 1 air filter bolt is stripped out $300
Makita DCS7311 concrete saw. runs good. new recoil and IIRC new air filter $300
Stihl TS400, runs and works but has some minor piston scuffing/scoring. $300
Hilti comes with a well used diamond wheel, the other 2 do not have wheels with them. all 3 are 14".
Dolly 5100S, completely rebuilt back around January. all OEM parts, P&C, bearings, seals, fuel line, filter, air filter, carb, 16" .325 B&C, maybe 3-4 tanks on it...@jmester rebuilt it and ran it so maybe he can chime in with a more exact run time. $275
Dolly 115i. very nice condition saw, I bought it to use as a shelf queen so never cut with it but it fires right up and a quick once over has everything appearing to work as it should. 487 total super bar(18" 3/8 .058 64DL) with a couple extra chains $225
024 AV has an air leak or needs carb rebuilt(been 3-4 years since i messed with it) but has an almost new 16" B&C. been 3-4 years since i messed with the 024AV so cant remember for sure what is wrong with it but it was minor. $150????
024WB new OEM fuel line, impulse line, fuel filter, carb kit and a Meteor piston.....i think possibly seals are new but cant remember....doesnt hold a tune IIRC but its been 6 months or so since i messed with it. $175???
Last edited:
