SOLD Masterminded Husky 2100cd with pics

[rocco490]

Masterminded Husqvarna 2100CD. Pretty good condition I will post pics of it. Wrap handle all things working including the manual oiler. Strong saw PHO $700
here's the pic

 

[rocco490]

bump

 

[Armbru84]

Any pics?

 

[rocco490]

been stuck at work i have a saw i need to ship out and couldnt today was planning to bring this saw in to work when i did that and get pics but havent been able to today i will tomorrow get some pics of it

 

[rocco490]

gonna pick it up soon and bring it to work to get some photos up of it

 

[rocco490]

bump pics coming

 

[rocco490]

sorry it took so long but got some pictures of the saw finally, didn't have time to clean the saw so its a little dirty

 

[Armbru84]

That's a nice looking saw. What size bar did you normally run on it?

GLWS as well.

 

[rocco490]

didn't run it much only 2 1/2 tanks threw it since it was ported. its a long bar saw, torque and broad powerband are its strengths. I recommend running a 28 at a minimum. It seemed to like a 36 on it it did good pulling hard with an 8 pin in a big loblolly pine

 

[rocco490]

it would be a good milling saw id switch to a 7 pin for that though if the boards are real wide. For regular bucking and cutting run the 8 pin (its 3/8)

 

[huskytime]

Anthony you are teasing me with another saw... this one would probably be great on a mill. I received an 1100cd which I was going to mill with but it lost its spark. I ended getting with a 395xp for the task instead. I'm going 42" .404

GLWS she's a beauty!

 

[rocco490]

just get your 395 masterminded and you will have an ideal large cc saw for anything! milling included

 

[rocco490]

bump this ones ready for a new home

 

[Normzilla]

Any trades or just sale? Sweet saw!

 

[rocco490]

just looking to sell this one

 

[rocco490]

NEW PRICE $725

 

[rocco490]

NEW PRICE $650

 

[Kensie1988]

Now this is getting rediculous, it's hard to find a good looking stock 2100CD for $500, much less one ported by randy for $650!

Surely someone out there has the funds to pick this steal up!

 

[rocco490]

I figure it will sell soon if not i will keep it no big deal I like the saw anyways and its a saw my dad bought new the saw sat on the garage shelf for about 15 years unused then my uncle used it some then it sat again so i got it from him and sent it to mastermind for the full treatment. I have ran 4 tanks threw it since I got it masterminded a couple years ago. Pulls a long bar great

 

[Kensie1988]

Sounds like a plan, no way I would let it go any cheaper than that, hopefully it all works out, if not then keep it as a family heirloom.