SELLING Poulan Jonsered 415 475 2083 2077 parts 3300 365 380 3750 330 etc too

[Cut4fun]

If anyone needs Jonsered 2083 2077 parts. I am going to part out this 2083 that fubbared topend and had a cracked crank.
I have the parts to rebuild it but I really dont need too as I still have many runners in yellow in this series.

So if someone needs parts PM or let me know here what your looking for.

 

[Cut4fun]

Cylinder cover, Air filter cover and a half wrap and used flock filter SOLD over on my site. Other parts pending.

 

[GoBigBlue1984]

That crank would be a great candidate for a stroker

 

[fastr90s]

If anyone needs Jonsered 2083 2077 parts. I am going to part out this 2083 that fubbared topend and had a cracked crank.
I have the parts to rebuild it but I really dont need too as I still have many runners in yellow in this series.

So if someone needs parts PM or let me know here what your looking for.

View attachment 139002 View attachment 139003 View attachment 139004 View attachment 139005

My 2083 died 3 yrs. ago, no parts locally. Stumbled across OPE ( read the thread on ex. porting/timing), joined yesterday, found this ad today. Maybe it's my lucky day, many are. I need the right, PTO side crankcase. My case developed a crack at the bar studs & worked it's way both directions to the seam. It runs, but not too good. While I've got it and my 046 apart ( bearings ) I thought about doing some light porting & omitting base gaskets. I'd attack the mufflers if I knew where & how. Chat with you soon.
Thanks.
Dave G

 

[Cut4fun]

Right now both cases and recoil are pending since yesterday.
I dont hear back by a member here today they will go to next in line.

 

[Dub11]

My 2083 died 3 yrs. ago, no parts locally. Stumbled across OPE ( read the thread on ex. porting/timing), joined yesterday, found this ad today. Maybe it's my lucky day, many are. I need the right, PTO side crankcase. My case developed a crack at the bar studs & worked it's way both directions to the seam. It runs, but not too good. While I've got it and my 046 apart ( bearings ) I thought about doing some light porting & omitting base gaskets. I'd attack the mufflers if I knew where & how. Chat with you soon.
Thanks.
Dave G

Welcome to the OPE and you have to be a quick draw in these parts.

 

[fastr90s]

Right now both cases and recoil are pending since yesterday.
I dont hear back by a member here today they will go to next in line.

Understood.
Thanks
Dave G.

 

[Cut4fun]

Understood.
Thanks
Dave G.

Got to realize I run 2 chainsaw repair places. 1 group and 1 website so there is close to 40K members between them shopping too. So folks here get put in line in order with folks asking elsewhere.

I put my silvey square grinder up for sale there yesterday and was told to mark it sold in about 7mins. SPF

 

[Cut4fun]

That crank would be a great candidate for a stroker

Half of it isnt.

 

[GoBigBlue1984]

I was just commenting that being in two pieces like that eliminates a step in the process.

If I hadn’t traded most of my 475/505 stuff away I would definitely be in the market for that crank Kevin.

 

[jacob j.]

Understood.
Thanks
Dave G.

Dave - I might be able to help you with what you need.

 

[Cut4fun]

Dave - I might be able to help you with what you need.

Cool this works out for everyone involved.

 

[GoBigBlue1984]

Brother JJ is a good fella.

 

[Cut4fun]

west coast xl spike set sold

 

[Cut4fun]

crankcase halves, recoil SOLD

 

[TomHL]

I need an oil pump for my 2077 according to a friend; I've been looking around to find compatibility, was wondering whether there is Husquvarna match like the 371/372?

 

[GoBigBlue1984]

Poulan 475,505
Jonsered 2077,2083

I would assume the poulan 415 shares the same pump but i’m not certain on that. I’m sure Kevin or others will know.

 

[TomHL]

Ok, I did an ebay check on the Poulan without any matches on ebay.

 

[TomHL]

Someone on ebay got back to me on the Husky 371, so no dice on the matches on that. Possibly I could get the old unit working somehow?

 

[jacob j.]

What's wrong with your old one?