SELLING Husqvarna 346xp oe

[broman78]

I discovered the total bar wasn't k95 mount if interested party is still interested I will still sell it. Here are the updated pics. The original owner scribed his name into the handle/tank just wanted to have a good picture because first pictures were rushed. The top cover has some discoloration not sure if first camera could pick it up. The Piston is clean as a whistle and this saw is ready to be ported.

 

[broman78]

Zoom in to see serial number and build date.

 

[Jon1212]

I discovered the total bar wasn't k95 mount if interested party is still interested I will still sell it. Here are the updated pics. The original owner scribed his name into the handle/tank just wanted to have a good picture because first pictures were rushed. The top cover has some discoloration not sure if first camera could pick it up. The Piston is clean as a whistle and this saw is ready to be ported.

From the picture of the bar, it appears to be D009(Husqvarna Large mount).

 

[Ladrhog]

Isn't that the larger cylinder on there also. My cylinder on my other 346 says 42 on it

 

[sunfish]

I would do $200 shipped, but I'm cheap and already have 4 of them.

@Hinerman was looking for one.

 

[sunfish]

Isn't that the larger cylinder on there also. My cylinder on my other 346 says 42 on it

Yep, OE usually have a 42 stamped on them, But the NE usually have nothing?
Prolly need to check if it's a OEM cylinder.

 

[sunfish]

Yep, OE usually have a 42 stamped on them, But the NE usually have nothing?
Prolly need to check if it's a OEM cylinder.

Actually that's a 353 cylinder.

 

[Ladrhog]

Actually that's a 353 cylinder.

So is that a good thing?

 

[Johnmn]

It's not a bad cylinder just not near as good as the 346 oe or ne imo. But they can be made to run good

 

[Ladrhog]

So am I correct that it is an open port cylinder

 

[Bluefish]

So am I correct that it is an open port cylinder

No.

Russ

 

[sunfish]

So is that a good thing?

Not really... The 353 cylinder is good, but doesn't make the power or RPM of the 346 cylinder. It also would lower the value of the saw a bit. That said, the price on this saw is not bad at all.

 

[broman78]

It is important that you have your information correct before you come in and spread information that is incorrect or not true. I have two 346xp oe and both have a 45 stamped on them. We don't know if that 45 is for cc's, different supplier or a different part number. I don't know of the history of these saws before I purchased them, but I know they have oem parts on them and strong running saws. I would have appreciated the courtesy of contacting me via pm before you come into my for sale ad and try to discredit me. Prove to me that these are 353 piston and jugs just by a stamping.

 

[sunfish]

I am not discrediting you, just providing info. The 346 OE and NE do not have removable transfer covers. The 353 does have removable cover. The cylinders in the photos you just posted are 353 , not 346 cylinders. This isn't a bad thing, as the 353 is a good runner. The cylinders were changed at some point in the saws past. Most people don't know the difference, but it's there.

 

[broman78]

I try to be as true and forthcoming on this forum because I want to taken seriously and it is important that what I say is believable. I'm not in the business of pulling wool over potential buyers eyes hence the updated pictures. I don't sell wolf tickets.

 

[sunfish]

But you are right. I should have PMed you before posting here.

 

[sunfish]

I try to be as true and forthcoming on this forum because I want to taken seriously and it is important that what I say is believable. I'm not in the business of pulling wool over potential buyers eyes hence the updated pictures. I don't sell wolf tickets.

I never thought you were trying to pull a quick one, or being deceitful. I would still buy a saw from you. Good saw, plenty of quality photos and a good price. You just didn't know about the cylinder differences.

 

[sunfish]

On a different note, I have a good friend down there in Texarkana that owns Naamans BBQ. Bet you have eaten there?

 

[Edwad]

On a different note, I have a good friend down there in Texarkana that owns Naamans BBQ. Bet you have eaten there?

I used to live in Kansas City. Great barbecue! Would like to try that place!

 

[Bluefish]

But you are right. I should have PMed you before posting here.

I don't think you have anything to apologize for.
If I was selling something on here I would make sure I had All my ducks in a row before starting a sales thread, including knowing if it was a frankensaw and making sure the chain was on right.
My wife is from Kansas City, I go to Gates and LC's when I am there.

Russ