SELLING Husqvarna 346xp NE ported $500 shipped

[jackjcc]

I found a husky 346 on a selling app last year. One owner and he only used pre mix husky fuel. It was ported last January by Miller Mod Saws, I don't know what numbers are in it but it was muffler modded by him as well. I have 4-5 tanks of 40:1 through it.

Really runs strong, and put a brand new carb in it because the L did not adjust very well. Blows 170 psi and is very clean. The original bar and 3 chisel chains will be included for free. They are all .325.

Feel free to make an offer.

Thanks for looking.



Sent from my iPhone using Tapatalk

 

[P.M.P.]

Dude do you take a layaway plan?

 

[Time's Standing Stihl]

This won't last long

 

[EvilRoySlade]

I like the compression tester spud but I’d be real leery about jerking on the starter cord with that much hanging off ridgid from the few aluminum threads.

Your saw, well it speaks for itself. And will probably be sold by morning.

 

[Miller Mod Saws]

I found a husky 346 on a selling app last year. One owner and he only used pre mix husky fuel. It was ported last January by Miller Mod Saws, I don't know what numbers are in it but it was muffler modded by him as well. I have 4-5 tanks of 40:1 through it.

Really runs strong, but has a tough to adjust carb. It probably needs to be gone through as the previous owner said it had sat for two years straight with fuel in it. Blows 170 psi and is very clean. The original bar and 3 chisel chains will be included for free. They are all .325.

Feel free to make an offer.

Thanks for looking.


Sent from my iPhone using Tapatalk

Hmmm!! Can I ask whom this one came from. Lol.

 

[jackjcc]

Hmmm!! Can I ask whom this one came from. Lol.

I had you port the saw, worked through AS to get it done.


Sent from my iPhone using Tapatalk

 

[Miller Mod Saws]

This one.

 

[jackjcc]

I like the compression tester spud but I’d be real leery about jerking on the starter cord with that much hanging off ridgid from the few aluminum threads.

Your saw, well it speaks for itself. And will probably be sold by morning.

Yeah, it's much harder to get the hose down tight, I never really thought about the leverage it would put on the threads though good point. I'll have to use the leg tuck method for pulling it over instead of drop method.


Sent from my iPhone using Tapatalk

 

[P.M.P.]

This one.

Dam fine job
There is no other saw that tugs on me more than a 346. I was just messin around wouldn't expect the seller to take me serious .
That saw would bring 450 alone without the porting.

 

[Miller Mod Saws]

Dam fine job
There is no other saw that tugs on me more than a 346. I was just messin around wouldn't expect the seller to take me serious .
That saw would bring 450 alone without the porting.

If I can remember I'll look tomorrow and see if I have the notes for this saw.
I would almost beat she prob running a 105-107 exhaust,16-18 deg blowdown, and a 78-80 intake. I would also bet she has a tad more comp than his guage is showing.
Dosnt look like she's been ran much at all in his pics.

 

[Miller Mod Saws]

Yeah, it's much harder to get the hose down tight, I never really thought about the leverage it would put on the threads though good point. I'll have to use the leg tuck method for pulling it over instead of drop method.


Sent from my iPhone using Tapatalk

If I had the money right now this one would be coming straight back here.

 

[jackjcc]

I got the saw from the previous owner for less than $200. I've never been about selling for profit. The only saws I've sold that I rebuilt were because I replaced them with an mtronic.


Sent from my iPhone using Tapatalk

 

[jackjcc]

Well since this is a nice saw highly collectible and what not I decided to splurge...

Yes that is a brand new carb, it was only $25 more than the kit.


Sent from my iPhone using Tapatalk

 

[old guy]

Did you not get my pm?

 

[jackjcc]

Did you not get my pm?

Just replied!


Sent from my iPhone using Tapatalk

 

[Johnmn]

You buying it @old guy

 

[old guy]

I offered him a trade, which he declined.
How ya been?

 

[USMC615]

Nice 346XP...

 

[jackjcc]

New carb makes it run perfect, starts and tunes easy now. If I'd have done this a while ago I might be leaping the saw. Nope I need new saws so this one goes.


Sent from my iPhone using Tapatalk

 

[Johnmn]

I offered him a trade, which he declined.
How ya been?

Good, I sold my house and bought a project house with 40 acres so I have been busy. Not much saw stuff. How about you?