Husqvarna 2100

[Adamski]

Guys in the know, is this a 2100 or just the recoil from one? I am tempted as I know it will go for peanuts and I am feeling the itch for something along the Makita 9000, although I get the feeling these 2100’s have a bit more grunt.

Cheers.

View attachment 126810

View attachment 126811

 

[Chainsaw Jim]

That black plastic handle only made it as far as the 1100cd. That saw there looks like a 380 s or cd.

 

[ajschainsaws]

I gotta feeling that might be a 480CD has it got a hand oiler there should be an aluminium tag above the clutch

 

[Chainsaw Jim]

I gotta feeling that might be a 480CD has it got a hand oiler there should be an aluminium tag above the clutch

The 480 has a one piece mag rear handle, all orange.

 

[ajschainsaws]

Yeah sorry I forgot the one piece handle

 

[srcarr52]

Pretty sure it's an 1100. They had the black two piece tank handle and a one piece top cover.

 

[jacob j.]

I think Jim has it - the muffler from this angle looks too small to be 1100 and the handlebar screws on the clutch side are too close together to be one of the bigger saws.

 

[Chainsaw Jim]

Pretty sure it's an 1100. They had the black two piece tank handle and a one piece top cover.

The top cover mount holes on the 380 are much closer to the handlebar. The 285/1100 holes are farther back to allow use of the two piece top.
The 56mm cylinder has a couple more fins with tighter spacing.

 

[Adamski]

Hmm, my knowledge of these saws is pretty limited at best. I just wanted a good big project, problem is there are literally no spares popping up for anything older than a 2101.. I shall still keep an eye on it, what sort of price are we thinking for this as a non runner. I’m thinking not much [emoji23]

 

[Chainsaw Jim]

Keep your fingers crossed that the piston and cylinder are good. If not then at least you'll have some highly sought after parts to sell for a small profit.
A shop wouldn't want more than $20-$50 for it as is, but a person flipping it may want as much as $100.