Huskyboy meets the 572xp

[RI Chevy]

Lol. It's really irrelevant. Set it up the way you need it and run it.
One will get stronger by the day and the saw will eventually get lighter. [emoji16]

 

[huskyboy]

I think a good 70-80cc (5 cube class) does the majority of what I do just fine. A 390-660-661-395 size saw wears me out a lot faster unless I’m just bucking logs on the landing. Once you start getting into big stuff they are more productive than 70cc sure. Smaller wood they just waste gas and tire you out faster imho. Use the tool for the job...

 

[andyshine77]

Two drilled holes later and that’s much better than having just one dog felling trees or bumping knots/crotches on the landing! Finally got this thing setup the way I think it should have come out of box... two dogs and a roller catch. For what I’m doing the two smaller dogs are adequate here in the east but out west in thicker bark I’d definitely upgrade to the large spikes. View attachment 186842View attachment 186843View attachment 186845 View attachment 186844

Did the roller come with the spike? I assume not.

 

[RI Chevy]

Stihl roller chain catcher. Good for a tenth or so in the cut! [emoji2957][emoji16]

 

[huskyboy]

Did the roller come with the spike? I assume not.

Nope, but it should come with that whole setup I put on it to begin with...

 

[huskyboy]

Stihl roller chain catcher. Good for a tenth or so in the cut! [emoji2957][emoji16]

Husky roller chain catcher on 572. My 7900 has the stihl catcher on it .

 

[RI Chevy]

LMAO. Pretty close. 572 must be a tenth slower in the cut. Lol

 

[CLEARCUT]

And no I didn’t weigh the ounces difference after installing the outer dog because I don’t give a *s-word for a lack of a better word lol. The gain in use ability mattered more to me.

Bingo

 

[CLEARCUT]

I’ve been running a chainsaw for a living for just over 21 years now, I’ve yet to physically weigh one.

Bingo x2

 

[shadco]

Two drilled holes later and that’s much better than having just one dog felling trees or bumping knots/crotches on the landing! Finally got this thing setup the way I think it should have come out of box... two dogs and a roller catch. For what I’m doing the two smaller dogs are adequate here in the east but out west in thicker bark I’d definitely upgrade to the large spikes. View attachment 186842View attachment 186843View attachment 186845 View attachment 186844

Where do you order it from?

.

 

[huskyboy]

Where do you order it from?

.

I got mine from Bob spike60 as a favor to me (thanks again!), but he is trying to cut down on online orders because he is so busy this time of the year he told me. I’m sure @Onan18 on the forum or any other husky dealer could order it for you. Comes with screws and nuts as a kit.

 

[huskyboy]

And if a guy wants to just fit big dogs on the stock cover they could file this area flat I’m guessing and run standard bar nuts like I was saying a while back. I haven’t tried it myself.

 

[TreeLife]

I’ve been running a chainsaw for a living for just over 21 years now, I’ve yet to physically weigh one.

I never gave a fvck what they weighed either.

 

[Onan18]

I got mine from Bob spike60 as a favor to me (thanks again!), but he is trying to cut down on online orders because he is so busy this time of the year he told me. I’m sure @Onan18 on the forum or any other husky dealer could order it for you. Comes with screws and nuts as a kit.

Also HL Supply is a Husqvarna dealer, I try to buy as much as possible from them as they are gracious enough to be our forum hosts.

 

[huskyboy]

Also HL Supply is a Husqvarna dealer, I try to buy as much as possible from them as they are gracious enough to be our forum hosts.

Good point sir

 

[deye223]

Lol. It's really irrelevant. Set it up the way you need it and run it.
One will get stronger by the day and the saw will eventually get lighter. [emoji16]

Finally someone that gets it ......

 

[shadco]

Also HL Supply is a Husqvarna dealer, I try to buy as much as possible from them as they are gracious enough to be our forum hosts.

I have tried HL Supply and other sources also.

None show anything for that part #.



.

 

[RI Chevy]

Did you try calling them? I am sure they could get you what you need.

 

[mdavlee]

Finally someone that gets it ......

If the saw is too heavy leave one beer on the landing to lighten the load [emoji1787][emoji1787]

 

[shadco]

Did you try calling them? I am sure they could get you what you need.

It’s nekid



.