Ben p.
Active OPE Member
- Local time
- 4:20 PM
- User ID
- 6481
- Joined
- Jun 21, 2018
- Messages
- 19
- Reaction score
- 16
- Location
- Denmark northern europe
Hello guys,
I come here from treebuzz where i posted a thread on a saw issue, woodpecker recommended me to join here to get some Good advice.
Long story short(prob not), was on a job taking Down 5 trees, while blocking Down the laste tree my Husqvarna 560 suddenly shut off, tried pulling start string But coudnt move it an inch.
I bought this saw on an auction, i have about 30 hours on it, it ran strong until the second it siezed. dont Know alot about it other than it a 560xpg and i saw a 2015 stamp on a part when i disassembled it.
Took my saw apart, Reason for piston seizing looks obvious(pictures below). Crap stopped my crank from being able to turn.
I dont know what that *s-word is, pardon my language, or how it Got there.
I thought it was Bendt metal, but it Burns like plastic and looks like plastic when i break it.
After removing the plastic stuff from the crank piston could move again.
Its all over my cumbustion chamber and my cylinder. Any ideers to get it off?
My tool situation is normal home tools, dremmel, drillpress and so on, no lathe or bigger machine shop tools.
Best regards
Ben
I come here from treebuzz where i posted a thread on a saw issue, woodpecker recommended me to join here to get some Good advice.
Long story short(prob not), was on a job taking Down 5 trees, while blocking Down the laste tree my Husqvarna 560 suddenly shut off, tried pulling start string But coudnt move it an inch.
I bought this saw on an auction, i have about 30 hours on it, it ran strong until the second it siezed. dont Know alot about it other than it a 560xpg and i saw a 2015 stamp on a part when i disassembled it.
Took my saw apart, Reason for piston seizing looks obvious(pictures below). Crap stopped my crank from being able to turn.
I dont know what that *s-word is, pardon my language, or how it Got there.
I thought it was Bendt metal, but it Burns like plastic and looks like plastic when i break it.
After removing the plastic stuff from the crank piston could move again.
Its all over my cumbustion chamber and my cylinder. Any ideers to get it off?
My tool situation is normal home tools, dremmel, drillpress and so on, no lathe or bigger machine shop tools.
Best regards
Ben