Holiday Giving Thread

[Jimmy in NC]

I am potentially interested


Sent from my iPhone using Tapatalk

Ok. I have been holding on posting until I can get pictures... will honestly be tomorrow evening or Saturday AM. You have right of refusal.

Sent from my SM-G920V using Tapatalk

 

[Whitty21]

Here is what I have.

Cover shipping or donate the cost of shipping to a charity of your choice.

Used OEM stihl 028 piston, ring and wrist pin included. No circlips

New meteor husky 55 open port piston

News style 041 (new badge) recoil. No back fuel tank part as I stole it. Spring is also not in it. Someone's name and number are carved into it.

I have some husky 61 cylinders with transfer if that floats anyone' boat.

Sorry but I think that's all I got at the moment

 

[coryj]

Here is what I have.

Cover shipping or donate the cost of shipping to a charity of your choice.

Used OEM stihl 028 piston, ring and wrist pin included. No circlips

New meteor husky 55 open port piston

News style 041 (new badge) recoil. No back fuel tank part as I stole it. Spring is also not in it. Someone's name and number are carved into it.

I have some husky 61 cylinders with transfer if that floats anyone' boat.

Sorry but I think that's all I got at the moment

Is the 55 piston 45mm or 46mm? I'd be interested in a 45mm piston.

 

[Whitty21]

Is the 55 piston 45mm or 46mm? I'd be interested in a 45mm piston.

Its the open port piston. So they are 46mm I believe. Non-windowed. I bought it on an assumption before finding my friends saw was a closed port.

I can measure it, but I am away until Monday now

 

[Red97]

Anybody interested in the box o 351/346 stuff that hasn't pm me please do so before Friday 8pm. Will draw a name Saturday. Ship out likely won't be till after the holiday. Supposed to be Heading out of town next week.

Sent from my SM-G950U using Tapatalk

 

[Chainganger]

No, I am a bow hunter and wiffed on a nice doe, hit a twig, clean miss. Lots of hours in the stand this year
@Cracker Boy

 

[Whitty21]

Is the 55 piston 45mm or 46mm? I'd be interested in a 45mm piston.

I was able check this morning, it is a 46mm. I ended up going for this kit for my friends 45mm saw. Seemed like a good quality piece https://www.ebay.com/itm/HUSQVARNA-...T-503168701-/141695017255?hash=item20fdae6127

 

[coryj]

I was able check this morning, it is a 46mm. I ended up going for this kit for my friends 45mm saw. Seemed like a good quality piece https://www.ebay.com/itm/HUSQVARNA-...T-503168701-/141695017255?hash=item20fdae6127

Thanks. Someone else recommended that piston in the "whats on your bench" thread. Sad thing is LRB is within driving distance for me and I still haven't done anything with my 55.

 

[XP_Slinger]

Anybody interested in the box o 351/346 stuff that hasn't pm me please do so before Friday 8pm. Will draw a name Saturday. Ship out likely won't be till after the holiday. Supposed to be Heading out of town next week.

Sent from my SM-G950U using Tapatalk

Well if ya don’t mind throw my name in the hat bud. I miss my 346

 

[EvilRoySlade]

Well if ya don’t mind throw my name in the hat bud. I miss my 346

Well your 346 went to Dustin then to me then I had @huskihl port it and raffled it off at Randy’s GTG. Don’t remember who won it but it’s out there kicking some bark.

 

[Whitty21]

Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050
New Oregon Powermatch K095 16" 3/8 .058 60DL.

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project

moparnut88 Pferd file handles - a couple sizes andmultiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar
- Stihl MS310 - PM by Sunday, 10 Dec @ 4:00pm for entry

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 56DL Low Profile A064mount with chain.

SOS Ridgerider: 5 bottles of Woodland ProSyntheticOil.

Czed - Husqvarna 350 piston (DRZ)

Moparnut88 - Husqvarna 137 tank, top cover and recoil

Redfin - 56mm Gulf piston for a 2100

Whitty21 - Used OEM stihl 028 piston, ring and wrist pin included (No circlips)
- New meteor husky 55 open port piston
- News style 041 (new badge) recoil. No back fuel tank part as I stole it. Spring is also not in it. Someone's name and number are carved into it.
- husky 61 cylinders with transfer if that floats anyone' boat

 

[XP_Slinger]

Well your 346 went to Dustin then to me then I had @huskihl port it and raffled it off at Randy’s GTG. Don’t remember who won it but it’s out there kicking some bark.

Yeah I should’ve kept that one. It was my first saw. But had I not traded it to Dustin I wouldn’t have my 288 so I can’t complain too much.

 

[huskihl]

Well your 346 went to Dustin then to me then I had @huskihl port it and raffled it off at Randy’s GTG. Don’t remember who won it but it’s out there kicking some bark.

@72thing, a local friend of @hseII, won it. He messaged me a few days later and said it was a good 3 seconds faster in 10" ash than a 550. He's very pleased

 

[huskihl]

I still have that Makita 6421 cylinder and piston. If no one can use it by 6pm tonight, it's going to brother @Wilhelm

 

[EvilRoySlade]

I still have that Makita 6421 cylinder and piston. If no one can use it by 6pm tonight, it's going to brother @Wilhelm

I mentioned covering shipping way back ago for someone but I think it got lost in banter. Even though I asked for US only I think this one would be a good one to help with. So let me if it goes to him and I’ll square up with you.

 

[Moparmyway]

Anybody interested in the box o 351/346 stuff that hasn't pm me please do so before Friday 8pm. Will draw a name Saturday. Ship out likely won't be till after the holiday. Supposed to be Heading out of town next week.

This box-o-346 stuff ................. I have a great condition AM used P&C for a 346 that I'll gift to whomever gets your box-o-346 stuff, if they want it. Just PP me the cost of shipping

 

[Moparmyway]

Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050
New Oregon Powermatch K095 16" 3/8 .058 60DL.

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project
Moparmyway: Great condition, used 346 AM P&C for this project, if winner wants it

moparnut88 Pferd file handles - a couple sizes andmultiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar
- Stihl MS310 - PM by Sunday, 10 Dec @ 4:00pm for entry

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 56DL Low Profile A064mount with chain.

SOS Ridgerider: 5 bottles of Woodland ProSyntheticOil.

Czed - Husqvarna 350 piston (DRZ)

Moparnut88 - Husqvarna 137 tank, top cover and recoil

Redfin - 56mm Gulf piston for a 2100

Whitty21 - Used OEM stihl 028 piston, ring and wrist pin included (No circlips)
- New meteor husky 55 open port piston
- News style 041 (new badge) recoil. No back fuel tank part as I stole it. Spring is also not in it. Someone's name and number are carved into it.
- husky 61 cylinders with transfer if that floats anyone' boat[/QUOTE]

 

[KYsawman]

Jon1212 : NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
NOS Oregon D176 Echo bar. 16" 3/8 050
New Oregon Powermatch K095 16" 3/8 .058 60DL.

Sty57 : tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn bar 20 inch 3003 mount .325 .063

Matt Ellerbee : crasftman 1.9 top handle (non runner)

Drptrch : three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks : Raisman 16" (60 DL) 3/8 .050chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan : 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project
Moparmyway: Great condition, used 346 AM P&C for this project, if winner wants it

moparnut88 Pferd file handles - a couple sizes andmultiple available

T.Roller : Free slap fight and maybe a Mac 797

MKinslow Husqvarna 570XP cylinder, light transfer.

XP_Slinger 3/8, .058ga, 20", 72DL, K095 Mount bar
- Stihl MS310 - PM by Sunday, 10 Dec @ 4:00pm for entry

Acornhill Poulan 4000 starter pulley

huskihl 028. PM by 4pm Sunday 12/10

RIDE-RED 350r: 16" 3/8 56DL Low Profile A064mount with chain.

SOS Ridgerider: 5 bottles of Woodland ProSyntheticOil.

Czed - Husqvarna 350 piston (DRZ)

Moparnut88 - Husqvarna 137 tank, top cover and recoil

Redfin - 56mm Gulf piston for a 2100

Whitty21 - Used OEM stihl 028 piston, ring and wrist pin included (No circlips)
- New meteor husky 55 open port piston
- News style 041 (new badge) recoil. No back fuel tank part as I stole it. Spring is also not in it. Someone's name and number are carved into it.
- husky 61 cylinders with transfer if that floats anyone' boat

[/QUOTE]
Kysawman- two good used 16” .050 D196 mount bars , Oregon brand Stihl 028 clutch kit.

 

[KYsawman]

Dang it I can’t figure out how to get my stuff on the list!!

 

[Philbert]

Dang it I can’t figure out how to get my stuff on the list!!

"Reply' to the list
Remove the 'Quote' stuff in the brackets ' [ ] ' at the beginning and end.
Add your stuff on at the end (or where ever you want!)

Philbert