First build help!

[Dave pulsifer]

I'm building my first saw. Makita 6401 to 7900 I got the piston cylinder of the bay from dandrikorp. It's a aftermarket cylinder not oem. I will try to get some pics up.

 

[Dave pulsifer]

Cleaned up the ports and a little extra. Any help opions, suggestions?sent my carb to poleman to do his magic also!

 

[Dave pulsifer]

 

[Dave pulsifer]

It's going to be a work saw I cut 25 cords on average sometimes more.

 

[huskihl]

Looks like a used cylinder?

 

[Dave pulsifer]

I took the carb off to send to poleman,so I cleaned up on exhaust port and intake. It was used only three or four tanks of gas since I put it on new.

 

[Dave pulsifer]

Anyone know where I can get metal gasket for this saw?

 

[Dave pulsifer]

Little more work on it

 

[smokey7]

If I understandd correctly this is a aftermarket top end kit? I'm very interested it's port timing numbers stock. What brand is the kit? How do you feel it's quality compares to oem. From what I can see it looks pretty dang good.

 

[Dave pulsifer]

If I understandd correctly this is a aftermarket top end kit? I'm very interested it's port timing numbers stock. What brand is the kit? How do you feel it's quality compares to oem. From what I can see it looks pretty dang good.

Got it off ebay,dandrikorp.the greek! It's aftermarket cylinder. So far so good I'm not sure bout the numbers me being a rookie but

 

[Dave pulsifer]

If I understandd correctly this is a aftermarket top end kit? I'm very interested it's port timing numbers stock. What brand is the kit? How do you feel it's quality compares to oem. From what I can see it looks pretty dang good.

He's got a big bore 54mm. And the 52mm.I got.

 

[Dave pulsifer]

Got it put back together with the poleman carb and it tears thru wood pretty damn good!