- Local time
- 5:06 PM
- User ID
- 319
- Joined
- Dec 29, 2015
- Messages
- 9,355
- Reaction score
- 61,526
- Location
- Strong Island NY
Some build pics, cause everyone loves build pics.
Fought with the brake assembly for over an hour. Busted the clutch bearing, so now that oem also.
The intake boot clamp totally sucked. Phillips head. Nearly impossible to tighten without spinning it around.
Used a husky decomp. Tossed the Huztl one in the round file.
The Cross jug has a flat ex roof. I raised mine 5* after the machine work and it's still flatter than anything I woulda done myself.
Today, the saw is getting a 10 pin. Will video. It's at 13800 in the vid above and it feels pretty good, but I'm used to pulling a 36 with an 026-so anything will feel good.
Fought with the brake assembly for over an hour. Busted the clutch bearing, so now that oem also.
The intake boot clamp totally sucked. Phillips head. Nearly impossible to tighten without spinning it around.
Used a husky decomp. Tossed the Huztl one in the round file.
The Cross jug has a flat ex roof. I raised mine 5* after the machine work and it's still flatter than anything I woulda done myself.
Today, the saw is getting a 10 pin. Will video. It's at 13800 in the vid above and it feels pretty good, but I'm used to pulling a 36 with an 026-so anything will feel good.