Ronie
Here For The Long Haul!
That was as rich as it got with the limiters on it.That seemed average for a small saw. At least you have a good base line.
Go a bit richer on the low speed jet.
That was as rich as it got with the limiters on it.That seemed average for a small saw. At least you have a good base line.
Go a bit richer on the low speed jet.
Much betterDid a quick muffler mod and pulled the limiters, helped it out some and sounds a lot better. I only had a few minutes to try it out, wife, so It's only tuned by ear.
Advancing the timing didn't do much as far as performance, I did have to richen it up a bit. It doesn't have much grunt but does have the RPMs.
It is a little snapper. I took about a 1/3 of the key off, it has a very thin key so maybe .020-.030 off.How much did you take off the key?
Seemed a bit snappier.