SOLD Clean 026 red lever

[Ryan Browne]

I have a nice 026 that I just don't use. Got it from another member this summer. I've wanted one for a while, and this one didn't disappoint, I just find myself reaching for ported saws instead. So, I'm gonna sell this one to fund a visit to Scott's for my 261. I'd like to get $250 plus shipping PHO. I'll put up some better pics later, but here's a teaser. It's a very good runner. Starts easily, idles well, and has an adjustable carb. I don't think the oiler is adjustable.

 

[Lightning Performance]

This should be sold in five minutes.

 

[GCJenks204]

Ryan and I have done business a couple of times. Stand up guy for sure and a good deal on a clean looking saw.

 

[Dub11]

I have a nice 026 that I just don't use. Got it from another member this summer. I've wanted one for a while, and this one didn't disappoint, I just find myself reaching for ported saws instead. So, I'm gonna sell this one to fund a visit to Scott's for my 261. I'd like to get $250 plus shipping PHO. I'll put up some better pics later, but here's a teaser. It's a very good runner. Starts easily, idles well, and has an adjustable carb. I don't think the oiler is adjustable. View attachment 101760

My red lever is a fixed oiler and it oils plenty.

 

[Orangeinthebarn]

I would be tempted on this one if I didn't have an 026. I'm 50cc saw poor right now. I had a red lever and sold it. Wish I still had it cause that cylinder seemed to be a real runner and that model also has the good muffler. As dub said it has no problem oiling. I ran an 18 on mine. Nice clean looking saw there

 

[Ryan Browne]

Here's some more pics. I just blew it off with the air compressor. A buddy of mine from CA is coming over this afternoon. He's just getting into saws so we'll probably run it a little tomorrow so he can compare it to his 261 and my 351/346. After that I'll take the bar and chain off and actually wipe it down. I'll try to grab a short video of it tomorrow while we're cutting.

 

[Ryan Browne]

A couple more:

 

[Cracker Boy]

Good guy here buy with confidence guys. Im comptimplating selling my red lever as well to send my 261c. Out dor port as soon as im done with this 361 im building to sell my 064 is going there. Ist before 261c

 

[Matt M.]

Dayyum! That is one nice metal tag saw! Glws!

 

[Orangeinthebarn]

Good guy here buy with confidence guys. Im comptimplating selling my red lever as well to send my 261c. Out dor port as soon as im done with this 361 im building to sell my 064 is going there. Ist before 261c

I would find a way to keep the red lever. You will regret it

 

[Cracker Boy]

I would find a way to keep the red lever. You will regret it

I know it runs so good with a muffler mod and wt 194 new seals bearings 44 mm non decomp.meteor piston.is why ibe waited.

 

[blacksmith]

That is one sweet red lever 026! I have one myself although it's not in nearly as nice of shape. It is ported and a very strong runner.

I did have a little mishap with it about a month ago while taking down a tree. It was in the way and the butt of the top landed on it.

I thought all was lost. It was 10 degrees out and it drove it in to the ground 4". Pulled it out and pulled the cord to see if the cylinder was crushed. To my amazement when I pulled the starter if fired up and idled until the fuel ran out of the carb! Got some parts and it was running a week later.

 

[Stihlsmoking]

That is one sweet red lever 026! I have one myself although it's not in nearly as nice of shape. It is ported and a very strong runner.

I did have a little mishap with it about a month ago while taking down a tree. It was in the way and the butt of the top landed on it.

I thought all was lost. It was 10 degrees out and it drove it in to the ground 4". Pulled it out and pulled the cord to see if the cylinder was crushed. To my amazement when I pulled the starter if fired up and idled until the fuel ran out of the carb! Got some parts and it was running a week later.

And they can take a beating. Sorry lol

 

[CrystalRiver1]

That is one sweet red lever 026! I have one myself although it's not in nearly as nice of shape. It is ported and a very strong runner.

I did have a little mishap with it about a month ago while taking down a tree. It was in the way and the butt of the top landed on it.

I thought all was lost. It was 10 degrees out and it drove it in to the ground 4". Pulled it out and pulled the cord to see if the cylinder was crushed. To my amazement when I pulled the starter if fired up and idled until the fuel ran out of the carb! Got some parts and it was running a week later.


View attachment 101974

View attachment 101975

View attachment 101976

View attachment 101977

Man, that's what you call TOUGH!

 

[Cracker Boy]

Man, that's what you call TOUGH!

Whats nice is parts are everywere for these too

 

[Dub11]

That is one sweet red lever 026! I have one myself although it's not in nearly as nice of shape. It is ported and a very strong runner.

I did have a little mishap with it about a month ago while taking down a tree. It was in the way and the butt of the top landed on it.

I thought all was lost. It was 10 degrees out and it drove it in to the ground 4". Pulled it out and pulled the cord to see if the cylinder was crushed. To my amazement when I pulled the starter if fired up and idled until the fuel ran out of the carb! Got some parts and it was running a week later.


View attachment 101974

View attachment 101975

View attachment 101976

View attachment 101977

Dam!

 

[RI Chevy]

Yikes. A KS cylinder too.

 

[computeruser]

I think it wants to live in Michigan. PM sent.

 

[Ryan Browne]

SPF

 

[bryanr2]

What's the story on the 488 in the opening post?