Cannon Super Mini Narrow Kerf

[Backtroller]

I picked up a Cannon bar CSM - S1 - 18 50 in 3/8lp. I can use Stihl 63ps chain correct? I’ve searched and think that it is a 66dl chain, but I’ve seen it using 67 and 68 dL too. If I plan on running it on a 026, does anyone know which it is?

Also, do they make a 8t rim for lp?

 

[Cracker Boy]

66 links for a p7 rim in s1 3/8 lp picco ps 100 percent sure. I just traded mine with 2 looops for a .325 sugi bar and 2 loops @fordf150. Can make them for you

 

[Backtroller]

Great to know. Thanks.

Can you run standard 3/8 with a different tip?

 

[Cracker Boy]

Yes

 

[Backtroller]

Ok, so I could also run .325 with a new tip. What chain can I run with that set up on a 026?

I’m hoping .325 .050 72. That’s the chain the majority of my 50cc saws run. Most oem Stihl 18” bars seem to be .063 and 74dl

 

[Willard]

Bump.
I have six brand new Windsor Mini Pro noses in 1/4" pitch to fit these Cannon Super Mini NK bars if anyone is interested.

 

[stihl_head1982]

I picked up a Cannon Supermini CSM-S1-18-50-2 (its an 18" Narrow kerf bar).
I believe this will run Stihl 23RS74 chain (.050 x .325 x 74 drive links)
Is there anyone here that can confirm that.
My plan is to run it on my MS260. Another question is, has anyone ran this combination on the same saw?

 

[Backtroller]

I’m still running the Cannon bar on my 261 v2. I’ll get you the chain specs, drive link number and bar info later tonight

 

[Backtroller]

Not sure if this helps you...the bar I had referenced above turned out to be a Husky Mount bar when it was delivered. CSM-H1 18 50. I added a .325 tip and modified it to fit the 3003 mount.

it ended up using a 23rs .325 .050 75

 

[stihl_head1982]

Not sure if this helps you...the bar I had referenced above turned out to be a Husky Mount bar when it was delivered. CSM-H1 18 50. I added a .325 tip and modified it to fit the 3003 mount.

it ended up using a 23rs .325 .050 75 View attachment 261622View attachment 261623

Thanks

 

[ferris]

What are the experience with the cannon supermini?

 

[davidwyby]

I haven’t used mine a lot but I like it. 24”, seems light.

 

[Squareground3691]

Little ripper .

 

[davidwyby]

My son was running mine on a ported 2156 and was giving me a run for my money with my 2166 buried in pine. The 2166 tune and it’s chain were a little off to be fair.

 

[ferris]

Does someone have long time cutting experience?

 

[davidwyby]

It’s a cannon….stellar reputation. So hard they are difficult to file, etc.