Anybody run a 462 head to head with a 7910?

[maulhead]

Cottonwood is harder.

ikr...

 

[Dub11]

There were 3 trees left in Kansas & it looks like you got 1 of them.

My kids got the other one.

 

[Cat 525]

Kansas produces more water than any other state! Maybe not in quality but in quantity!

 

[maulhead]

I've been know to burn cottonwood...burns hot, just not for long.

 

[RI Chevy]

Why not Post the stopwatch Times now & Clear the air?

Nothing was saved Heath.

 

[mdavlee]

 

[Deets066]

That 660 did run good

 

[mdavlee]

That 660 did run good

It’s a lot of fun. The non decomp Kevin has will give it a good run if not beat it

 

[Deets066]

It’s a lot of fun. The non decomp Kevin has will give it a good run if not beat it

Almost forgot that Kev still had 66’s. He’s been ate up with that 661.

 

[mdavlee]

Almost forgot that Kev still had 66’s. He’s been ate up with that 661.

Still got 3 I think. [emoji16]

 

[huskyboy]

Why not Post the stopwatch Times now & Clear the air?

Keep in mind we ran them in 20” or so oak... The 7900 was about 1/2 sec quicker than ported 460. The ported 562 was about even with 7900. The ported 660 was about 1 sec faster than the 562. The carlton chain wasn’t the greatest on the 7900 , even had Mike touch it up. I have tested the 7900 and 562 with the same b/c before and the 7900 is ahead. It really proves nothing not running the same b/c on all of them. Just for fun. I don’t mind loosing, I learn more from it than winning. Lol

 

[Dub11]

Keep in mind we ran them in 20” or so oak... The 7900 was about 1/2 sec quicker than ported 460. The ported 562 was about even with 7900. The ported 660 was about 1 sec faster than the 562. The carlton chain wasn’t the greatest on the 7900 , even had Mike touch it up. I have tested the 7900 and 562 with the same b/c before and the 7900 is ahead. It really proves nothing not running the same b/c on all of them. Just for fun. I don’t mind loosing, I learn more from it than winning.

Yeah that as clear as mud

 

[huskyboy]

Yeah that as clear as mud

I came away with more questions than answers for sure. Not sure what kind of chain Jeff was using either. 562 20” round lgx I hand filed and dialed in. 7900 24” carlton that was hit with a double bevel... not dialed in yet. Both 7 pin rim.

 

[Dub11]

I came away with more questions than answers for sure. Not sure what kind of chain Jeff was using either. 562 20” round lgx I hand filed and dialed in. 7900 24” carlton that was hit with a double bevel... not dialed in yet. Both 7 pin rim.

Yall need to get a dyno put the saws on it, tune for max power then rig up a gallon tank to run off of and let them run at WOT and see what survives. Other wise this just sounds like a Jr high dick measure contest.

 

[Johnmn]

Yall need to get a dyno put the saws on it, tune for max power then rig up a gallon tank to run off of and let them run at WOT and see what survives. Other wise this just sounds like a Jr high dick measure contest.

QTLA

 

[Time's Standing Stihl]

If my memory serves me well it is in Arizona

It's in Iowa....

 

[huskyboy]

Yall need to get a dyno put the saws on it, tune for max power then rig up a gallon tank to run off of and let them run at WOT and see what survives. Other wise this just sounds like a Jr high dick measure contest.

I need to put a 162se handlebar on my saws to gain that extra bit to beat Jeff’s saws and keep lifting them pink weights...

 

[RI Chevy]

Do you remember your time Mason?

 

[T.Roller]

Do you remember your time Mason?

It don't matter if yall weren't using the same chains

 

[RI Chevy]

It does matter right now, because I am calling BS on this!
Regardless of bar and chain used.